开云体育

I uploaded a small document describing how to connect the various modules of the tiny spectrum analyzer.
You MUST use a 3.3V compatible Arduino (such as zero or due or compatible). Arduino code and a small windows executable for controlling the tiny spectrum analyzer are also available in the files area
--
HBTE Files section:?/g/HBTE/files
Erik, PD0EK

On Fri, Dec 6, 2019 at 12:30 PM, <erik@...> wrote:

I uploaded a small document describing how to connect the various modules of the tiny spectrum analyzer.

Great work.? Thanks for sharing.? I see an electrolytic cap in your picture that I can not quite see what it is connected to.

Its a low ESR cap for extra decoupling of the 3.3V. Not sure its needed.
--
HBTE Files section:?/g/HBTE/files
Erik, PD0EK

Hi Erik,
Re. the build instructions.

Connect the receiver module to D1and the LO module to D5 of the Arduino(WARNING: You MUST use a 3.3V compatible Arduino)

Should that be 'Connect the receiver module to D0' rather than D1 ?? (const int SI_nSEL[2] = { 0,5 };)

Thanks !
Jim

Ah, yes. Will correct
--
HBTE Files section:?/g/HBTE/files
Erik, PD0EK