开云体育

I've got a fair bit to learn about the Si4432, but here's my take thus far: If the Si4432 can be coaxed into giving us a dynamic range of 120dB in detecting a signal, that's quite good.? I don't see

I'm afraid this will never run in Wine/Mono. Mono is the open source version of .NET, but apparently not completely so.... The closest thing I could find about this error is this :

No clue. It worked on any computer I tried -- HBTE Files section: /g/HBTE/files Erik, PD0EK

A well known fairly cheap SA solution for HF applications is the RSP1 combined with PC SW. I thought it would be interesting to compare the tinySA performance with the RSP1 as the RSP1 also uses an

Hmmm, If I install dotnet in Wine, Mono gets uninstalled. Then, when trying to run SA.exe, I don't get the error I had. Instead, I get the error that Mono is not installed. Reinstalling Mono, and

I ordered a 2.8" touch display with exactly the same intend! -- HBTE Files section: /g/HBTE/files Erik, PD0EK

While waiting for the last SA-parts (The SAW-filters) I have combined the software from https://www.changpuak.ch/electronics/Arduino-Project-VISIONARY.php with the HyperVFOSI_New from Erik. A few

Hi Erik, Goed plan ! I think I forgot to install .net as well in wine. Going to work on that.... Tnx, Hans

Mmmm. I'm using .net data visualization. Any chance you can find an emulator with .net data visualization? -- HBTE Files section: /g/HBTE/files Erik, PD0EK

Hi, Just tested SA.exe in Linux (Debian 10) using Wine (4.0.3) but it does not seem to be working. I installed vcredist_x86, and when I start regedit using wine, I can see the registry key of

For a standalone unit everything is in the files area (the .ino file) For usage with windows or linux with windows emulator there is an executable (SA.exe) that enables control from a PC I will be

try this search? "windows emulator for linux"

I've been following this d

Thanks!

My SW ignores the maximum rbw. Thus no problem. Please read the datasheet. The range is120dB -- HBTE Files section: /g/HBTE/files Erik, PD0EK

Eric, Yes, it's easy to get carried away thinking what one might do, never get around to doing anything, One of my meta-hobbies. I am thinking I should start out with your tinySA as described, and go

There are measurements that require a lower noise floor than the tinySA can offer. A simple solution is adding a SPF5189Z based ultra low noise amplifier module. These run from 5 volt, will provide

I am running at the maximum baud rate, but I guess there are a few issues with processing of serial data on the Nano. It also has problems, to recognize optiional numbers after a command.? E.g. "W50"

Timeout for the reply is set to 200ms. Even a Nano should be able to reply in that time. Are you running on maximum baud rate? -- HBTE Files section: /g/HBTE/files Erik, PD0EK

Thanks for the quick feedback. With a terminal program all responses where OK, this is why I asked for the critical sequence SA.EXE is looking for. I rechecked with SA.EXE and it sometimes connects to