开云体育

Very frustrating. The V2 boards have arrived in Melbourne but are "on hold" presumably for Covid19 reasons. Glenn <vk3pe> Regarding V2 PCB's and the TG, awesome! 73, Robert, WA2T

Hi Gyula, The item number does not come up for me. Regarding V2 PCB's and the TG, awesome! 73, Robert, WA2T

It wouldn't be too hard to have another version of my PCB Gerbers to cater for that pinout if required. Glenn vk3pe In hindsight, I also realized that the foot layout is different from the B3555. The

Mouser also stock B3760, which has the same pin outs as the B3555, slightly wider passband and different matching parts. I was wondering about using those for the analyser, and the B3767 with centre

In hindsight, I also realized that the foot layout is different from the B3555. The Polish seller put it up again as a 50pcs item, so far it has had 2 buyers and more than 10 leftovers. So you can try

Hi Gyula. Many thanks for that pointer. I don't know why I didn't see that offering earlier, especially since it is relatively local to me. 73 Bill, VK7MX and VK1MX

Speaking of SAW filters, Dave has cleverly put a mode in the ESP32 controller version to plot the response of the SAW filters. It's pretty amazing how it corresponds nicely with the Data Sheet. (Data

Its a pity the NDF550 has a different pin out. Fine if a new pcb was being developed but right now, doesn't suit the pcb with the original part. Seems like the Polish guy is the only one with readily

Hi Bill, you do not have to stick to the Polish supplier when you have a similar one. link here:

Hi Glenn Yes, I was aware of the small mods to V1 but tidier is something to aim for, mostly. Not sure what your plans for Gerber release are but if available later I'll get an order off to China and

Hi Bill.V1 could still be used with a couple of small mods. V2 is "tidier".Hope you doing ok down in vk7. We are in lockdown as no doubt u know.?Glenn?Sent from my Samsung Galaxy S7 smartphone.

Great news Glenn. I knew holding off on V1 was a good decision :) Bill VK7MX

I'm onto V2 of my version of the tinySA board.?? The group of us (M0WID, WA2FZW, G3ZQC & VK3PE) working on this, are using the name "simpleSA" to differentiate from Eriks. The V2 board has provision

I knew that would be a winner… now for the refinements… Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois

Here is my lash up tracking generator using two SI4432 into a ADE-25 mixer, the test object is a qrp-labs 20m bandpass filter, the analyser is my homebrew ESP32 version.? Ugly! Despite no filters on

Erik, Purchased...Now the wait for the order to be processed - Stay tuned... :) 73 de Marty, KN0CK

Compiling the tinySA.ino without ui_sa.* and sa_core.* delivers the error message "ui_sa.c: No such file or directory" - see att. "error message" After removing the line #include "ui_sa.c" from

leave the Arduino IDE, delete ui_sa.* and sa_core.* and try again to compile ui_sa.* and sa_core.* where intended for a backport that never happened -- HBTE Files section:

Hi Erik, When using the files to program the Arduino I got a error message "'M_LOW' undeclared (first use in this function)" - see the attachment. Please can you check if the files you uploaded in

Thanks a lot :-)