开云体育

Ari and others, with fear and trembling I am wading into this conversation. I have trimmed the email a bit.? See below.

Hi Fernando! I extracted the entire contents of the MVS-TK5.zip. I agree with your argument that the tk5.cnf was modified. I tried some modifications in the hope of opening the MVS console but it

I looked back and found these initial notes: So the main logo screen appears, probably the one where there's no input field for a logon id until you press the Clear key (at least that's how the TK5

On Tue, 22 Apr 2025 10:00:31 -0300, Arí Ricardo Ody via groups.io <nightrider43@...> wrote: Hi Ari, I have looked up the configurations of m Tk5 installation and didn't found any

Hello everyone! I used grep in the Linux terminal to search for the sequence 327 not followed by a zero in the conf directory. I found the following in tk5.cnf: # # local 3270 devices (VTAM) # 00C0

Hi Ari, The answer is 3270 terminals must be defined as device type 3270. Change the 327 to 3270 and it should work.

It looks like the device definition is not correct... 6:05:51 HHC01462E 0:0202 devtype 327 not recognized shouldnt that be devtype 3270? not 327? Maybe there is a missing 0 on the end in your config

Hi Mark! I have no idea what is causing my problem. So please don't answer my request for help with new questions. If I knew how to answer your question I would probably know what the problem is and

I didn't spot that! Looks well dodgy :-) Roops <mark.gutzwiller@...> wrote:

I'd look in the config to see if a device got changed from 3270 to 327. That could mess up the whole ball of wax. <mark.gutzwiller@...> wrote:

That log looks healthy. The last few lines show connection of a 3270 terminal, the same as I get. I've attached 2 screenshots, before and after hitting <Clear> on the 3270 screen. The problem may be a

Ari, These lines are making wonder, 16:05:51 HHC01437I Config file[73] conf/tk5.cnf: including file conf/extcons.cnf 16:05:51 HHC90020W 'hthread_setschedparam()' failed at loc=console.c:3299: rc=22:

Hi Michael, I have tried to connect multiple terminals to the 3174 but they cannot seem to connect/communicate properly (they all hang). If I only have one terminal setup and connected it connects and

Yes, I receive sleeping cat image and try possible combination off the 3270. Nothing happen. The file you asked for is attached cheers <mvs@...> wrote:

I?d try all 3270 in every combination. Nothing happen [email protected]> wrote:

On Mon, 21 Apr 2025 09:12:39 -0300, Arí Ricardo Ody via groups.io <nightrider43@...> wrote: Hi Ari > Hi! > > The problem is that the screen is simply never freed up for typing. > If I

Hi Ari, Have you tried the "Attn" key ... or "Reset"?? What 3270 emulator are you using? Jim

Does hitting <Reset> unlock the keyboard? Then <Tab> should move the cursor to an input field. That said, I only ever need to use the <Clear> key to logon. Are there any error messages? Can you enter

Hi! The problem is that the screen is simply never freed up for typing. If I press enter, clear or any other key, the 3270 terminal shows the screen with that X indicating that the keyboard is locked.

On Fri, 18 Apr 2025 13:04:05 -0300, Arí Ricardo Ody via groups.io <nightrider43@...> wrote: Hi Ari, I hope the following will be of some help. Did you access the link shared by Rupert