开云体育

zpmain wrote: It is not possible to run ICSF in hercules. It IS possible to run ICSF in z/OS however! :) Unfortunately however, I don't believe it will work using the current 4.7 version of

Hi Dave, If you use X3270 you can activate the trace and in the trace you can analyze what TSO receives when you enter the password. HTH René

Hello Is it possible to run ICSF in hercules ? What changes need to be made in CNF to support running ICSF ? Jake.

Definitely one DSN at a time. Often would XMIT a PDS into a PS file, then each PS file into a PDS member, then XMIT that before transfer. Possibly Terse / UnTerse. Have you tried an EAV

The CBTTAPE software is tiny compared to the size of a 3390-54 that is mostly full of data.? I'm not sure you could even send a full volume backup via XMIT. Brian

Brian_Westerman wrote: [...] Sounds like a bug in Bill's "Hercules Helper" script. He's passing "8" instead of "64" as the number of desired CPU engines in the 3rd option of the makefile.bat

I'm running 4.7? (Hercules-4.7.0.11119-SDL-gf7d2360a-x64) from the pre-built binaries. I have never even tried to build it myself, but I used the helper script and it seemed to work very well. I

You know I found in the message archive this - /g/H390-MVS/topic/hosed_password_for/74966269 From 2020 - My problem is almost the same as what Doug was experiencing then, and it does

The message logged on the console at the failure (in TSO) is: IEC331I 056-012,DAVE ,IKJACCNT,RCU ,IGG0CLB6 Which I agree means a “a security verification failed”. So my

I truly do understand why I would want to protect the master catalog, I just do not understand and need to correct the fact that the MCAT password would fine with a batch mode job that does an update

I mean connecting it with lan cable.

After installing win ctci and connecting the LAPTOP if it doesn't connect with IP. I believe there is some testing exec which can help to troubleshoot Is it tt64test ? So here should I choose tun ?

Ian Shorter wrote: Good catch, Ian! I had forgotten about that fix. So yeah: Brian? What version of Hercules are you using? Official 4.7? Or development 4.8? You might want to try your large (ftp?)

I think you have misunderstood the value of password protecting the MASTER CATALOG. It is there to prevent you from 'accidentally' updating it. Let me give you some background. Before VSAM, the master

Brian, what version of Hercules are you using? There was a fix to the develop branch at the end of August 2024 that corrected a problem in Hercules' QDIO code, see

Not enough info given. Not sure about MVS et al but normally the hosts file over-rides the DNS so by manipulating the hosts file you can connect. If the system you are trying to connect to has an

No magic secret here, or anywhere else in the universe as far as I know. I t would be useful to know what message appears, not by magic, on the console. For example in case of wrong password IEC331I

Most of the CBTTape software is in XMIT format. <Brian_Westerman@...> wrote: -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all?

Most likely not, unless you have publicly registered your internal IP address on the Internet, which I guess is possible of course but very unlikely. You would want to use either a internal DNS

So intrtnally to connect the zos running on hercules cannot be achieved with this DNS then? [email protected]> wrote: