开云体育

Mattis, The other thing you have to remember is that you are generating a new nucleus. So, you have to apply all of the service and mods that. were applied before your did your IOGEN before you can

You have SYS1.OBJPDS in your JCL, so you'll need SYS1.OBJPDS01, 02 and 03. Joe

Why isn't the picture included?? https://i.imgur.com/Z5ZZBS7.png

I think I found one thing that I haven't done. According to the sysgen manual I define three utility data sets. But I simply don't understand what all this means. It says in the Figure 37 text caption

Hello Joe, Here is the stage 1 in put file: https://drive.google.com/file/d/1SWqCcaLmhKQmNKfV5uer4xm5sumTtTe3/view?usp=sharing It is almost identical to the one in TK4- except for the first 2703 at

Mattis, Looking at the IOGEN.JCL you submitted, there are no 2703 devices. Can you attach what you fed into STAGE1? Joe

Hello All IOGEN experts! I want to change on of the 2703 devices in the TK4- config to act as a BSC3 device so I started to try to do an iogen on tk4- and failed completely. The steps described in the

Super job Bob, congratulations ! Cheers, Peter

NJE38 version 2 is now available in the files section (nje38v200.zip). This version now contains the much-needed TSO-based TRANSMIT and RECEIVE commands. These commands allow you to send and receive

Found it in GC23-0002-0 "OS/VS2 System Programming Library: JES2" &RJOBOPT controls scanning of JOB cards by JES2. Changed from 5 to 3.

I am working on some SMF reporting w/ MVS 3.8j. SMF type 4, 5, and 20 records (step termination, job termination, job initiation) all seem to have the accounting information in them (pano and room,

Hello Doug, Am 20.07.2020 um 23:47 schrieb Doug Wegscheid <dwegscheid@...>: You did miss it. :-) https://bsp-gmbh.pocnet.net :wq! PoC PGP-Key: DDD3 4ABF 6413 38DE -

thank you.

See: /g/H390-MVS/message/1346 https://bsp-gmbh.pocnet.net/

Are you to the point where sending a link to the replica is appropriate? (Or did I miss it, quite likely!) Sent from AT&T Yahoo Mail on Android On Mon, Jul 20, 2020 at 4:22 PM, Patrik

Hello Mike, Am 20.07.2020 um 18:52 schrieb Mike Schwab <Mike.A.Schwab@...>: I already did this. That's what I meant. But no answer, eventhough he requested me sending a link, when we briefly

Hi, I have replaced RPF183. I found some issues in the ARCHIVER component. Cheers, Rob

Take what you have and set it up as a replica on your site, with credit to him? Post him a link and ask him to review and note what gaps to fill? -- Mike A Schwab, Springfield IL USA Where do F

Hello Scott, Am 10.07.2020 um 22:23 schrieb ScottC via groups.io <sccosel@...>: I wrote him an email to his private address a week ago, as he requested, "when I have the site running".

Drew, thanks for sharing that; I've been meaning to do something like that, but I like yours, and it ended up being simpler than I thought it would. Adapting that for a different naming scheme and to