开云体育

It does run, but the system we have does not implement handshaking, that is automatic CP CLOSE after a print, and automatic CP RESET after a signoff. Cheers, Rene FERLAND, Montreal

Hi, Note there are older versions of MTS that do run on the 360/67 and 370. These are a bit harder to get working but they do work. Perhaps an older version would work on VM/370. Rich

Fascinating, so many operating systems, so little time :) I hadn't discovered Internet Archive until you mentioned it Fish (I see that's what everyone calls you, I hope I'm not being too

Dave Wade wrote: [...] [...] If MTS is ESA only, then maybe it'll run under VM/ESA 2.40? * https://archive.org/details/VMESA240ADCDCD1 If you know VM/ESA, you might want to give it a try. I'd try

Rob, Not with the released systems. VM/370 is very old so S/370 only. The MTS system runs in ESA mode (I think might work in XA mode) so won’t run the free VM. I suspect you could build a 370

It looks like the VM/370 group has been quite active and has recently released a VM/370 Community Edition V1R1.2 I'm just curious whether it ought to be possible to run MTS under VM.? If anyone has

You probably don't need to write anything in either assembly language or Plus. When the CmdStat programs fills a file it starts another MTS job from some public file. Unfortunately I can't recall

Keep getting annoyed by CMDTAPE asking for tapes, so I started poking around the source code on SYSU. Now its all messed up because I gave it a mislabeled tape and it demands that I "call a systems

I can run MTS 6.0A fine with SDL Hercules 4.5.0.10830-SDL-g58578601 on my iMac (check it out on the attached log file). However, I don't face a problem with the stats tape, so I don't know what would

Mike Alexander wrote: [...] Which is precisely why I asked to see his Hercules logfile. AND his configuration file. AND where he downloaded his guest from, instructions for how to

This sounds like a "super dump" which is the MTS equivalent of a kernel panic. There may be some incompatibility between that version of Hercules and D6 MTS. If you can figure out how to create a

John Palmer wrote: Many of us are. But not very many of us are running MTS of course! THAT'S not good. :( Mount the dump tape? Is that an MTS thing? Or are you maybe referring to the message

Anyone using Hercules 4.5 yet? When I run the standard distribution (i.e the Hercules.cnf file that was provided with d6.0A), the system appears to crash whenever it requests that the stats tape

Thanks: Getting this when compiling on CentOS 7: /usr/local/src/hercules-helper-master/hyperion/machdep.h:715: multiple definition of

Thanks for your work on this Mike. Sent: Thursday, December 1, 2022 17:27 To: [email protected] Subject: Re: [H390-MTS] Hello from new user. I can add a bit to this. I have both FTP and

Hi: Seems good news :) Paco

I can add a bit to this. I have both FTP and Telnet working in my copy of MTS and Hercules. Unfortunately this requires both changes to Hercules and the 1996 version of MTS, neither of which is

John, I hope this helps. 1. I don't think this has ever progressed 2. I don't think anyone builds a current Hercules for Linux. You have to build from source 3. The only currently maintained

Hi John, 2. https://github.com/wrljet/hercules-helper should have all you need best regards, René.

Hi - I was a student at Wayne State University in the 1980's and used MTS quite a bit. I noticed that there haven't been many posts lately - I know people are probably busy and don't have much