开云体育

Have a look at the Garmin site see pdf here, page3 https://www8.garmin.com/specs/pcwiring.pdf This identity’s the data pins and power pins. ?Buy a comparable connector off fleabay and wire the

Does anyone have a wiring diagram for the GPS (Garmin GPS 72/73 to an RJ22 male connector (4P4C)?

Yep understood cheers Ted. ?Soldering these pins are a pain. ?I drill the rear cups out to maximum I can ?so the wires fit better. Still it’s a battle Cheers gents -- Brendan

Brendan, Paul K is correct. Two power cables for the Gemini 1. Sorry for the ambiguity. I understand that the diagram shows the inputs on the Gemini 1 CPU and not the power cable end and the cable end

I think Ted meant he has 2 power cables for Gemini-1 :)

Actually I just twigged you said Gemini 2! ? Are you sure? ? ?This image included in this thread is for a Gemini 1, 4 pin DIN power socket. Yet you said you have two power two rerun GND. So I’m a

Ted the above image is showing the power pins as looking at the power socket, not the plug! Looking at the plug (front), the pins are mirrored! ? Take that into consideration. Cheers -- Brendan

I have 2 Gemini power cables. One I have used for years, the other didn't seem to work. I ran across it recently and decided to rehab it. Referring to Paul K's diagram, the known good cable has the

Thanks! Good to know.

AFIAK, they are both manufactured by Aveox who are based in Simi Valley, California. Sent: 04 July 2024 03:43 To: [email protected] Subject: [Gemini_users_io] Gemini 1 & 2 origin Anyone in the

USA -- Brendan

Anyone in the group know where the 1s and 2s were/are manufactured?

Brendan’s design is here: </g/Gemini_users/files/Gemini%201%20Bluetooth> and you can find mine here: </g/Gemini_users/files/Gemini%20Bluetooth> Cheers David Sent:

Thanks Brendan. I'll pass that on. Would you post a link to the DIY wireless projects. Best Regards, Russ

Russ this guy sells Gemini: Gemini WIFI (

Someone on Cloudy Night has asked me about how I control my G11/G-1 wirelessly via SkySafari. I see that the SkyFi wireless hotspot module is no longer being sold. What are his options? I occasionally

I'm trying to remember what version ( https://gemini-2.com/pcb-pictures.html ) G1 is the system??? If earlier version (not last ver3) does it have dual SOT23 diode D10?? See image If so these fail

Power loss could result in some corrupted settings with G-1. While it shouldn’t cause stalls, corrupted settings have been known to result in some very strange and unexplainable behavior. You could

Sure sounds like the motors should not have a problem. The black anodized mount will heat up very quickly in direct sun! It can get really hot. Also, Losmandy black anodized aluminum is known to turn

Michael Thanhs for the ideas. ?Never in direct sunlight unless I specifically open the RORO roof during the day like I did today. ?I have 2” thick polystyrene in the roof and walls so tends to be