开云体育

The schematic specifies 47uH, 0.7A. It's about 6mm square with a round bobbin. Could it be Bourns SDR0604-470KL? Thanks David

I think I did the same thing. The parts are on the way - progress soon!

Well picked up. ?I think I looked at one data sheet got the specs and another place showed slightly different specs particularly capacitance The “L” is low capacitance, the “N” nickel plate

Thanks Brendan, I'm glad you're helping chew on this with me. Looking deeper into the spec sheet, it seems like they might be the same actual part with the only difference being what sized reel they

Cheers Bryan happy yo help. ?Anything needs just ask. ? I would have thought low capacitance would be best ?to less encoder wave shape interference But maybe more could help, I’m not sure. ?If

You're right about the dirt & grass inside. I think it'll clean up fine. I'll take an extra look at F1 & the RVs. Thanks for the clarification on pin 8. I misread the schematic on the Gemini FAQ and

Bryan many thanks great images...they tell all, "the rude Gemini"hahaha Imgur does this just to cover their legal ass .? Its like a bug has got in and done its thing all around the bottom of the

Thanks Brendan. I was curious about the black pin 8 too. That’s not just a photo oddity. The Gemini-2 FAQ showed that as an NC pin, so I wasn’t overly concerned about that specific pin. It is

you can use a usb to rs232 ?converter (install it’s driver) and some terminal program ( https://learn.sparkfun.com/tutorials/terminal-basics/all ) like terra term or real term (

Hi everyone, It looks like I have a dead RS-232 chip and I'm planning to replace it. For some details on this, my 2007-vintage Gemini-1 G11 started acting up a few days ago. It intermittently stopped

Oops, As an OG star hopper living under the L.A. light dome the Nexus DSC is a great solution IME. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena Astrospheric

Hi Mark, For visual work I have always MUCH preferred to use Losmandy mounts because they were designed? to be used as PUSH-TO mounts. When a Losmandy mounts is combined with Astro Devices Nexus DSC

Thank you Paul Kanevsky and Benjamin White.? I'll keep my finders crossed my hardware is in good condition and start with a new PEC curve.

Hi everyone, Would anyone recommend a DSC system, perhaps Nexus, that would work with Losmandy drive motors? I think I might prefer that to Gemini 1 go-to. Is one in better touch with finding objects,

Just a couple of suggestion from somewhat of a newbie to the Gemini 1. Try a cold start. Also check try changing the internal battery on the Gemini. [email protected]> wrote:

There is no worm index position sensor in Gemini -- there's only motor encoders that are used to report worm PEC index. Gemini remembers and restores the PEC index position from the previous session,

I'm working to get PEC set up and working properly for my MI-250/ Gemini I L4.? Ray G. is providing tech support in the PEMPro forum, here's part of one of his posts: "It's probably best to ask on

No one can really say. ?It’s like computer glitches unexpected input. ?It’s possible the HC touch screen (overlaid on the display) has a bad contact area or two in resistance thus sent commands

Well, while using the gemini 2 handcontroller I touched/pressed the top line/display zone of the HC.? It went blank and the next goto commanded on the HC led to a runaway slew necessitating a

Congratulations, David! You, Brendan, and Michael are an amazing resource for the community. We're glad to have you back! Greg From: [email protected] <[email protected]> On Behalf Of David