开云体育

I have found that bad polar alignment can affect orthogonality measurements as the star drifts while phd tries to measure dec movement. Also large PE can affect that as RA drifts during the

Hello Gemini I.? I realize I may also have an MI-250 problem, so I've cross-posted this. I've been working through all the growing pains of a new imager.? I think I'm close to getting useable data,

Dale, Mike is the best! I think he'll have you back up and running in a jiffy no problems. But a bit of.lick can't hurt! Cheers/Chip -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric

Many thanks to all who have responded! Things are indeed looking like we need some professional help, and Michael Herman is local-ish! Will send a final update after we're operational! Thanks! Dale

And the original battery is difficult to obtain although I did buy two via Amazon. -W.

There I go again fat finger typing. ? CR2032 is correct SMD type, not CR2302 sigh. -- Brendan

Hi Dale. the battery for that PCB is a SMD (Surface mount type) CR2032 battery and holder with side positive clip (positive is towards the top of the PCB. ?That’s if it’s defiantly that version

Which battery holder to fit depends on the board revision, as the footprint of the holders used are different. It’s possible to use a 2450 battery holder with an early PCB but it does involve

Hi all, figured I should join and post to this group rather than the Gemini-2 now: My club has recently obtained a G11 with Gemini-1 board shown here: https://gemini-2.com/pcb/GeminiPCB1A.jpg We

I will add these two settings to the notes on spreadsheet if not already there. Thank you Paul

That was exactly the problem, Paul. I had checked the "Flip using Go-To" but not the "Report pier side" box. My GM811G HD is working great again. I wasted a lot of time over one unchecked box. I'll

Thank You Paul! I sure appreciate the help. OK, found it. Will continue my Daytime flip attempts.

it’s part of the telescope settings screen, Sonny. I’ll post a screen shot when I get back to the computer. Regards, -Paul

Hi Paul, Thank You for checking in on me. OK, just going by what I saw when trying to sign on. At least I did get here, so I'm happy. I've been trying to find the screen you are showing, but no luck.

Hi Edward, sorry for the necro post. For me, I've resorted to stopping the sequence in NINA, then going to my Gemini virtual hand control on screen. I initiate a Park at Counterweight Down. Then

Sonny, you were never a member of Gemini-II users group, at least not under the same login you're using here (this is the Gemini user group, primarily focused on Gemini-1). You may want to join that

Thank You Edward! I've discovered I'm not a member of any group except for the Gemini II group, which I find odd. So maybe that explains why this lost lamb is bleating in the wrong pasture. Maybe I

Sonny, did you find the spreadsheet in the Losmandy group that i uploaded to go with the presentation? ?It lists the other parameters you might need to set. does a MF happen when you goto a target

I'm fighting with NINA and Meridian flips again. I'm posting in hopes that someone might be able to help me out. At one point I copied in a fellow Gemini II members settings and POOF! Everything was

/g/Gemini_ASCOM_Driver/message/5389