开云体育

Hi Edward, sorry for the necro post. For me, I've resorted to stopping the sequence in NINA, then going to my Gemini virtual hand control on screen. I initiate a Park at Counterweight Down. Then

Sonny, you were never a member of Gemini-II users group, at least not under the same login you're using here (this is the Gemini user group, primarily focused on Gemini-1). You may want to join that

Thank You Edward! I've discovered I'm not a member of any group except for the Gemini II group, which I find odd. So maybe that explains why this lost lamb is bleating in the wrong pasture. Maybe I

Sonny, did you find the spreadsheet in the Losmandy group that i uploaded to go with the presentation? ?It lists the other parameters you might need to set. does a MF happen when you goto a target

I'm fighting with NINA and Meridian flips again. I'm posting in hopes that someone might be able to help me out. At one point I copied in a fellow Gemini II members settings and POOF! Everything was

/g/Gemini_ASCOM_Driver/message/5389

Hi Terry, I have same question and struggle with my gemini. Which value should i need to add in western goto limit on Gemini I ? Regrds Noel

My bad. I forget people here can and often are not here in the USA. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric Weather for Imagers - Click on my sig! Astrospheric Signature (

If in UK David is closest but I ask why do you think it’s an EEPROM ? Yes they can go faulty but it’s kinda rare Cheers -- Brendan

OK Sent: 23 January 2024 18:40 To: [email protected] Subject: Re: [Gemini_users_io] Faulty eprom in control panel David UK - you have repaired my units before - just change the serial port on

David UK - you have repaired my units before - just change the serial port on oine and replaced the power switch no my spare unit...? I shall call you Regards Mark

Where on the planet are you? Sent: 23 January 2024 17:48 To: [email protected] Subject: [Gemini_users_io] Faulty eprom in control panel Hi - I have a Gemini 1 L4 v1.05 unit that seems to be

Mark, What is the control panel? Do you mean the Gemini 1 controller board in the metal case or the Hand Controller? If you mean the main circuit board in the Gemini 1 metal case you may be better off

Hi - I have a Gemini 1 L4 v1.05 unit that seems to be having eprom issues.? Luckiiy I have a spare control panel that works fine.? Where can I buy a replacement eprom for my faulty unit? Regards

That's a fair statement.? 8^) -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric Weather for Imagers - Click on my sig! Astrospheric Signature (

To be fair, it's a much longer drive for Brendan to drive by your house ;)

It may well be that I am biased, Brendan's proven depth of knowledge is like the proverbial rabbit hole. But in my defense Michael H. drives by my house on a regular basis and we do lunch once in a

FWIW I honestly think that accolade belongs to Brendan Smith… David Sent: 16 January 2024 19:27 To: [email protected] Subject: Re: [Gemini_users_io] Gemini 1, NINA, Meridian Flip Mount

The G-1 manual says 9800, N, 8, 1 If your comm port settings are wrong, strange things will happen.? Usually when a Micro communicates with an RS232 chip, it will control the data starting and

madastro, Michael Herman is the ultimate Gemini 1 hardware debugger.? The older Gemini 1 boards often have issues with their I/O ports as they are not protected and sometimes are damaged while being