开云体育

Yes, 100%? Do you have a copy of the Gemini manual?? Look at *Rene Gorlich's website* ( https://www.docgoerlich.de/Gemini.html ).? Rene is the genius behind the Gemini main board firmware. Also

Hi All Is it possible to rename and reconfigure the sites stored in "Site Information"? I have updated the "Hollywood" coordinates to my home coordinates but it now just shows as "User Site" The

Some additional links for you. Here is the *Gemini GFU page on gemini-2.com* ( https://gemini-2.com/GFU-download.html ) Here are the files you need if you have an Ethernet connection to the Gemini 2

Hi Trevor, It's not just three files.? You need to download the latest GFU program which will automatically update to the new L6.0x firmware for the Gemini 2 main processor and Hand Controller

Do I need all three files ??? and what is the process for updating, any particular order, thanks :)

Seems to be fixed now with the service pack 1 release. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena Astrospheric Signature (

Hi Trevor, This being 2024 and the current production release of the Gemini 2 firmware being L6.02 with PIC servo code v3.0 and HC 1.61 you should probably update as? soon as possible.? Many issues

HC firmware V1,10 2014 mainboard v5.21 2017

Thanks, but you're still missing one important piece of information -- the Gemini firmware level. Can you go to Menu->HC->Info screen on the Gemini hand controller and take a photo and post it here?

Sorry - G2-? Ascom gemini Telescope Driver 1.1.23.0

Could you be more specific and give an actual number? Gemini 1 or 2? And what level of firmware?

The previous version :)

Thank you Paul Yahoo Mail: Search, Organize, Conquer On Fri, Oct 18, 2024 at 5:58 PM, Paul Kanevsky<yh@...> wrote: Hi Folks,?There appears to be some compatibility issue with Platform 7

Thanks, for the update.

Hi Folks, There appears to be some compatibility issue with Platform 7 ASCOM Chooser and Gemini.NET ASCOM driver. The chooser refuses to select Gemini driver. Any existing apps that are already

That makes a difference :) What version of Gemini firmware are you running?

I forgot to mention that I am in the Southern Hemisphere :)

I received the new encoder this morning. It's now installed and the motors are working perfectly again. It took less than ten minutes. For the concerned folk, no sparks, fires, or smoke have been

On Tue, Oct 15, 2024 at 03:24 PM, Neil Allison wrote: > > East and West limits depend on each individual set up. > Limits that work for one person might not work for somebody else. > -- > Thanks and

East and West limits depend on each individual set up. Limits that work for one person might not work for somebody else. -- Thanks and Best Regards Neil <paulbuckley14059@...> wrote: