Re: Info Mount Losmandy height adjustment
|
Thanks Paul, but if I put stainless washers the resistance is the same or it also depends on the material, i.e. in this case the original ones seem not to be stainless steel. If I wanted to replace them with stainless washers would the results change? So from what I cpaired anyway better to use two washers, do you confirm? Thank you. Regards, Thomas Bianchi Il giorno dom 1 set 2024 alle ore 12:05 Thomas Bianchi via <thomas.bianchi81= [email protected]> ha scritto:
Hi, I wanted to ask a question but more of a curiosity....
I noticed that Losmandy mounts up to about 2005/2008 had one of the two screws with two washers, which in current mounts for example are no longer present i.e. there is only one for each screw. What was the purpose of the two washers, just to identify it from the top adjusting one or as a special shim and if so, what were they used for over the years?
?I enclose a photo of a not recent Losmandy G11 taken from the Internet for better understanding.
|
