开云体育

Hmmmm. Mine seems totally different than Dave's too. Link to my website page with picture of my illuminator: http://danks.netfirms.com/Illuminator.jpg Terry Danks

Same here. I don't see how the current polar scope would use that device Kirk. Might be for earlier models? This is the entire 'led' portion of the scope http://www.optcorp.com/product.aspx?pid=14802

Brianwith I am seriously considering using only the DAP1522 into my Gemini 2 for communications. with it and the Power supply being on the same circuit, should seriously help eliminate ground loops. I

Brian Well I got it configured. With the Gemini 2 into it, I can connected using DHCP over it. I can get the loggin with either 192.168.0.123 or httpp//gemini Even my Android still works on the

Hi Tom, I never left, just been too busy to post. I'll try to do better ;) Regards, -Paul

Hi Brian What you would need is what is called a Access/Bridge. I use a D-link DAP-1522, because it can be configured in either mode. I does not an external ant, but does have 4 points to connect

Hi Terry, Thanks for that. Fourtunately, I have not purchased the dimmer yet. I sent the gentleman who owns the website an email requesting a paypal address, but he has not responded. I think I will

I can understand why the Gemini II went with the more standard coaxial DC power connector - to save front panel real estate needed for all the new connection possibilities. But I also liked the fact

Just a quick update. I have my G11 and Gemini 2 assembled. Once power is applied the hand controller fires up and the various menus become active. Using slewing speeds both motors move in both

Hi all! I just joined the group and look forward to learning more about my Losmandy G8 Gemini II. Does anyone know how to change the small battery in the Gemini Electronics box? I just received a

Terry, I was just looking at the same thing. My illuminator seems much more "modern". All self contained with internal batteries and not much of a dimmer... more on/off. -Ted

Hey guys, I was setting up to plug in my Gemini 2 for the first time this morning and noticed something that is likely everyone here already knows... The Gemini 1 and Gemini 2 power connectors are

Hi Kirk: I had a look at that dimmer. It seems totally incompatible with the illuminator I received with my polar scope. Mine is totally self-contained and powered by two LR-41 watch batteries. There

Thanks Paul - do you (or anyone else) have a recommendation on a wireless adapter? Cheers Brian

Hi Paul Glad that you can join us again, it has been since Feb 6 that we have heard from you. I know that the Gemini ASCOM group is really keeping you busy. (I monitor that one also) For the New Comer

Anyone care to say why it is a lousy idea? Thanks, Gale

Wired Ethernet and wireless wi-fi can all be used with G2 (with optional wireless adapters). TheSky will work over serial or USB, and will also work over Ethernet/wi-fi if you use the TeleAPI plugin

Hi Terry, I share your thinking on the clutch tightening. They are clutches, not locks. With the CKS it seems easier to tell when it is sufficiently tight but it is also just easier to loosen and

Aside from the interesting look web interface, I'm curious how Gemini II is conceived to be controlled by a planetarium program like theSky? Is the idea we connect via USB? I really like the idea of

Dave and Terry, Thanks for all of the advice on the accessories and keep it coming if you think of anything else! It is very helpful to someone like myself who has not even received his mount yet! I