开云体育

Hello Rene, Thank you for your reply!? Wonderful and good to know. Is a picture of the tactile membrane available anywhere? John

Hi John, It has. Just plug the classic HC into the port into the button at the bottom. This is the same type of membrane as the DeLuxe HC with the display had. I love it, escpecially at the eyepiece

Hi, The Losmandy Gemini 2 web page includes a feature item: Support for the original four-button controller. Would anyone have more details regarding this feature? Does it mean that Gemini 2 can

Hi Miguel, So you can access the web server, but the HC stays dark? What you can check: - Is the HC connected to the correct port (second serial port)? - Does the cable used has all 6 wires connected

Hi everybody, We have received the new Gemini 2, but we can not see anything on the screen, as if the Gemini was empty. One partner has tried to load the drivers or firmware, but we are not sure if

Are they actually shipping in any numbers yet? I placed an order with Astronomics the day after they were listed on Losmondy's home site. Any idea how long I will have to wait?

FWIW AP-Client mode is the normal mode used by most wireless routers and take a WAN connection to create a local network that has access to that WAN connection (typically your CABLE or DSL

Hi Wojtek, I have successfully connected a Gemini 2 to my wireless network using a TrendNet access point in AP-client mode. In this mode it basically acts as a media converter to go from WiFi to

Wojtek, You have to connect G2 to your network over the Ethernet port, but.there are adapters from cable to wireless available on the market. Ren???

I have Losmandy G11 with Gemini I and wireless network with DHCP protocol and consider buying Gemnini II. Interesting for me is wireless connection from home to the telecsope ouside (cold weather

Yes, Bill. The latest version of the driver supports both versions of Gemini. Regards, -Paul

If I update my Gemini driver to the II version will it work with Gemini I. Or should I have two drivers? Bill

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Gemini-II group. File :

Hi René, Thanks for the update on PEC, modelling, and the high-res encoders. Sounds like you have made a lot of progress since you are ready to test the modelling. Gale

Good answer. Thanks, Keith Jim Benet

Hello Group I've uploaded a new combo of main SD card and software for both HC and main board. It should hopefully solve all DHCP question, allows to set network parameters on the HC, colors the

Rene, thanks for the response. No, I am not that familiar with the development of Gemini I. I came into use of the controller only in 2004 and have benefited from the stable feature set of

Good question. I suspect not because even if the mount and scope haven't changed, you likely have dismounted the scope and dis-assembled the mount to move it to the remote location so there likely

Sorry for the misunderstanding Gale. I thought you was asking if her was going to do any more work on the Gemini 1 Tom

Franco, Scott sells his GPS with an new plug for the G2. If you want, you can adapt the old unit to G2. Here I wrote how to do it: --------------------------------- I've been testing with and