开云体育

Yes, it's unparked. I can slew manually.

Is the mount unparked? This rings a bell for me... Graeme

Hello, I'm having an issue with my new GM811. When I connect Cartes du Ciel, everything seems fine until I try to slew to an object. I get an error message "SlewEquatorialAsync." I tried reloading

It has been a couple of years since I've done any imaging.? Using the hour angle approach to meridian flip in EKOS always worked for me.

Chip, Please see attached pics of the can of SuperLube I used. I believe the label is exactly the brand name you described, unless you think it is somehow counterfeit or it is somehow a facsimile of

John, Here is the best data I could find from the manufacturers' websites for the greases being discussed. There have been other greases discussed but these are the best based on performance

John, I'm not sure what lubricant you used that you believe destroyed your thrust bearings but it was likely not Synco SuperLube with PTFE. SuperLube has better tested lubrication performance under

Is anyone using automated meridian flips with indi? Let me know how it's working for you. What your workflow is to set it up, and how reliable it currently is. I've updated ekos / indi to do automated

Doug, So sorry to hear about your challenges and hope you are on a path to better living. The lubrication issue has been discussed in the Losmandy Users and Losmandy Hackers forums to a long extent

Hi Doug, Welcome back to the Rabbit Hole that is astro imaging. My advice starts out with work in a place that will not be disturbed by anyone or anything, is very well lit, clean & dry. Work on top

Hi Zolt, Or Bingo, as in now the ASIAIR is working? -- Chip Louie Chief Daydreamer Imagination Hardware Astropheric Weather Forecast - South Pasadena, CA Astrospheric Signature (

Hi Zolt, Bingo? As in you have the Gemini 2 on the network and can see and ping that IP addy now? Yea! Next try opening the Gemini Telescope.NET app, do NOT press connect. Select Setup>Configure

I am fixing to take down my G11/G2 from pier and wondering if any of our group has any experiences they can share and particularly, any mistakes one might have done and how was it corrected? ?By the

Bingo! Thanks for following up. Zolt

Hi Zolt, So you have the Gemini 2 using Ethernet connected inside the house to your router? Try this using the HC from the top MENU > SYSTEM> NETWORK or MOUNT (I'm on L6 and both work)? set the IP

Still here, but stuck on the issue of getting my home WiFi (Google mesh network) to see the Gemini. I can connect the ASIAir through Ethernet. Not the most conversant with networking so not sure how

Zolt, You still with us? -- Chip Louie Chief Daydreamer Imagination Hardware Astropheric Weather Forecast - South Pasadena, CA Astrospheric Signature (

Oh, my setup is a three-way between the Gemini-2, ASIAIR and the Beryl AC1300 travel router so maybe not directly applicable for your use case being all copper all the time. If you are using the

Hi Leo, Long time! Happy to hear you're on the right side of the grass. Yes, sometimes an ASIAIR update needs to be done from the apple or google play store to work right. Might be due to where you

Thanks, I'll check that out. I'm hoping to have something functional in about a week. I'm adding it to the ekos alignment tab.