开云体育

correction between 91 and 94 degrees

Thanks. WSL=94,?? ESL= 94,?? WSL=3? these are my settings.? Assuming use of only the HC and a planetarium connected to gemini, I interpret this as permitting a meridian flip between 91 and 93

Thanks Brian for this information. Cordially envoyé : 17 février 2023 à 17:41 de : Brian Valente <bvalente@...> à : [email protected] objet : Re: [Gemini-II_io] problem with my Gemini Hi

That would mean the USB connection is poor. Maybe it's on the Gemini side, if you had tried multiple USB cords and different laptops. Probably easiest and best solution is to use Ethernet, as that's a

Frank, If you can’t generate a meridian flip from the hand controller then you probably have the limits set incorrectly. Paul

I have always used the usb method. I set up the ethernet option to troubleshoot the problem.? The communication errors only seem to occur with usb.? The failure to meridian flip happens with either

Frank, you reported two different problems, each likely unrelated. Communications error and mount failing to flip are two different things and are better diagnosed separately. Do you get the the

Things have deteriorated. Getting these errors now as shown in attached. From different laptops and trying a variety of usb cables.? The image that is hard to read is regarding an ASCOM/Gemini time

Thanks After trying various cables and laptop usb ports, the meridian flip issues remains.? The settings I used for limits and criteria in the capture software are identical to those used

Thanks!

Yes that is backlash Your guiding should work normally. The calibration only uses the north direction. You should bump the mount north prior to calibrating to take up any backlash [email protected]>

I have some curious behavior in calibrating guiding with a GM811G/Gemini II (L5.21, HC V1.41) using ASIAir Pro (V2.0/10.46), 60mm f/4 guide scope, ZWO ASI290MM Mini camera. All seems to work well

meridian flip. I will try a different usb cable and report back. I think you need to separate out the comm error issue from the meridian flip. A comm error would cause all sorts of issues which may or

Thanks Brian. I tried direct ethernet and it too failed the same way regarding meridian flip.? I will try a different usb cable and report back.

these are comm errors, so you need to try different components to see what is causing the issue I suggest trying a different USB cable and/or trying to connect via ethernet (swapping the USB cable is

Hi Michael thresholds? It will show the correct voltage. The Red and yellow warning levels are inaccurate and will be fixed in a future update. The battery voltage is good down to about 2.0v

Hi Brian, first of all thank you for your answer. Just one last question:Is the voltage control on the web interface reliable, the yellow and red thresholds? Cordially Michael nvoyé : 17 février

Thanks for the write-up Bob. Any word on how it finds and tracks objects. Thanks, John Desbiens

Hi Michael A new battery will discharge quickly down to around 2.9-3.0v and remain steady for several years. That is normal. If you believe your settings are being lost? Ensure the battery contacts

Hello everyone, I have a problem with my Gemini, I come to you to solve it if possible. After a few tries with the web interface, the sites now remain in memory, which was not the case. On the other