开云体育

I agree with Zolt - whenever my ASIAir fails to recognize/connect to my G11G, it is always due to the cable. Either the connection is poor at the ASIAir end (loose), or the USB-B (printer) cable

Hi Bob make sure you are using the correct USB port on the Gemini 2 https://youtu.be/_OjFoA0Cq54?t=80 -- Brian Brian Valente astro portfolio https://www.brianvalentephotography.com/astrophotography/

Maybe check that the cable is good? Do you see Losmandy Gemini as one of the choices in the Mount menu? My Air connects to the mount OK, though sometimes the USB connection is loose on the Air.

Hi Bob, Do I understand that you can see your imaging and guide cameras already on the app? Gemini's should be really easy as they remember time location etc.

I recently bought an ASI Air to connect mount, telescope, camera, and guide scope.? I tried connecting the ASI Air using a USB cable that fit in the port on the Gemini.? When I try to access the

Hi, I remade all soldering of din plug on the mainboard and verify visually all the others. looks good. After that mounts works well for 10mn. Then I had again both messages back from powerfail DEC

Correct. In G2, bit 2 Modelling in use is used to indicate whether an alignment was done. Bit 1 is always set to 1.

ok

FYI this is confirmed as expected behavior. Gemini 2 has no "Initial Alignment" anymore, <99 always returns 1 + x. The coordinates are taken from startup. -- Brian

Frank I'm going to set you up with a support ticket so we can talk directly There's a lot of cooks in the kitchen right now, and I realize it can be confusing for all wrote: -- Brian Brian Valente

----------------------- Jim W Phoenix, AZ USA

On ----------------------- Jim W Phoenix, AZ USA

In the auto meridian flip settings, is the "use telescope side of pier" on or off?

I haven’t looked though each of the previous posts so I am likely missing necessary information. I am running 5.21 and I think ASCOM Gemini Driver 1.1.17.0 with NINA 2.1 HF1 RC0x and haven't had

I tried to do exactly what you describe here, Frank. I had Level 6 beta already flashed, so I tried a cold start, slew to past the meridian, and then do :Mf#... and it flipped with no problems, even

Brian thanks - I'm starting to loose track here. Do you want me to repeat the test ?? Please repeat where you want the limits set. I will then image the scope at the point of trying the meridian

The NCP is *not* an alignment point in the sense that Gemini understands (and neither should the initial alignment be anywhere near the poles if it can be helped or it's asking for trouble!). On first

Thanks Frank yes inside testing is fine for now Looking at the zip file you uploaded (thanks again that is perfect) does not appear you reset the limits as I described previously? Also i did not see a

Regarding the tests to solve the issue, they are done indoors, otherwise it might be months. From a cold start CWD: - the mount is pointing at the NCP - if I do a "go to bright star", it goes there

Set up and HC version images.? By following Losmandy setting limits video my limits are 94 otherwise contact with tripod legs.