¿ªÔÆÌåÓý

  1. Gemini-II
  2. Messages
Single Messages Topics Expanded Polls

Re: Meridian Flip - Stopped Working

Jim Waters
 

I haven¡¯t looked though each of the previous posts so I am likely missing necessary information.?

I am running 5.21 and I think ASCOM Gemini Driver 1.1.17.0 with NINA 2.1 HF1 RC0x and haven't had issues doing Meridian Flips with my G11G.? My setup process is as follows.? I was running ASCOM Gemini Driver 1.0.84 but upgraded recently.


  • Set CWD.? Use bubble levels on RA and DEC
  • Power on ¨C Quick start (Don't understand the difference between Quick and Cold Start now)
  • Polar align the mount with PoleMaster and SharpCap Pro
  • Park the mount CWD
  • Cycle power ¨C Quick Start
  • Model the mount - 3 or more in west then east
  • Setup NINA's target

I connect to the Gemini-2 through point-to-point Ethernet.? After modeling the mount I don¡¯t use the HC.? Everything is through NINA.? When I kick off an imaging session the mount is CWD and I tell NINA to sync from NINA to Gemini-2.? Never the other way around.? I have had issues syncing the other way.

I use Edward's setting for NINA and the mount Limits settings.

I am not sure if the above adds any value.


-----------------------
Jim W
Phoenix, AZ USA
Join [email protected] to automatically receive all group messages.