开云体育

Hi Eric, If you want I can burn you a new EPROM with the latest available firmware. I just need an empty EPROM. YOu can buy one in Mexico City from AG Electronica. I have been following this thread

Peter I am sorry, but I am not one to figure out what advantage a Gemini 2 will have over Gemini 1, for anyone. If I do that I am only giving you my opinion. All of the features so far that I am aware

Hola Rainer: Yes, I remember that you did install an outboard battery system, it works very good and you explained me how to do it. Actually that is my only concern with my Gemini, so I will make one

Tom or Rene - I looked, but don't find, a summary of the advantages of purchasing a Gemini II for one who has a Gemini I; and I for one, would find that very useful, starting with the advantages of a

Hola Eric, I am not René but your friendly Neighbour in Mexico :-) ha ha ha If your Gemini I is working troublefree (same as mine) and your only concern is the battery only lasting 1 year then do the

Jim, But, Jim, for sure it is a communication problem ;-) Just imagine that there a lot of things running in parallel and independently. The main board waits for boot mode and is solicited to upload

Crap, that's why mine didn't work the last time I tried to do my upload. It had been working fine up until the previous upgrade and then it stopped. Rene thought it was a communications problem

Tom, I think, better explanation is.. impossible.. Thanks! Miguel Angel Pérez Hernández Alpha Cygni S.L. www.alphacygni.com c/ San Agustín, 23 38410 - Los Realejos S.C. de Tenerife Islas Canarias -

PS. Let me try and clear this up a little better. At the bottom of the Gemini Mount web page (mountpar.cgi) is a selection called "Default Startup Mode" It has 4 selections: Cold Start, Warm Start,

Ok, clear! Thank you very much, I will let you know my results when I have the Gemini 2 here.. Regards! Miguel Angel Pérez Hernández Alpha Cygni S.L. www.alphacygni.com c/ San Agustín, 23 38410 -

Miguel We can update the firmware but asking for the "boot mode" first... is it correct? The boot mode is a selection made on the web interface Mount page at the bottom of the web page. For now there

Hi Tom, thanks for your advice.. I don?t know if I understand this well: We can update the firmware but asking for the "boot mode" first... is it correct? I have ready the MicroSD card with the Hand

The last I heard anything on this topic was about 2 weeks ago. At that point the update from Losmandy was that they were expecting to clear the backlog of orders that existed at that time by the end

Dear René: Long time without saying hello to you, but my very old Gemini system mounted on an HGM-200 has worked so flawlessly for years that i did not need support :-)). The only problem being the

Hi all There is a small bug in the hand controller firmware, where updating the firmware and boot mode interferes with each other. The tempeary fix is to set the boot mode to select everything but

Thank you very much.. and yes it is, this card is FAT.. Regards! Miguel Angel Pérez Hernández Alpha Cygni S.L. www.alphacygni.com c/ San Agustín, 23 38410 - Los Realejos S.C. de Tenerife Islas

Miguel Yes Fat, not fat 32. All SD card should be either FAT of FAT16 which is really the same thing. Tom

Last question........ format: FAT.. not FAT 32.. (under Windows) Thanks! Miguel Angel Pérez Hernández Alpha Cygni S.L. www.alphacygni.com c/ San Agustín, 23 38410 - Los Realejos S.C. de Tenerife

Tom, then is: 1. Format it with FAT system file 2. Then copy the contents of "HC_SD_card.zip" since it is, respecting the directories. 2. Copy the gemhc.bin to the root directory of the SD card. OK?

Miguel You are correct, but I always copy the HC_SDcard.zip contents first, after the format. Tom