Miguel
You are correct, but I always copy the HC_SDcard.zip contents first,
after the format.
Tom
On 2/10/2011 12:06 PM, Miguel Angel P¨¦rez Hern¨¢ndez wrote:
toggle quoted message
Show quoted text
?
Tom,
Thank you very much for your email. I have a "new" Micro
SD card with adapter, I think I can use this to redo the
SDRam card..
A step by step instruction is always wellcome, but I
understand that is:
1. Format it with FAT system file
2. Copy the gemhc.bin to the root in the directory of the
SD card.
3. Then I?m not sure if I need to copy the contents of
"HC_SD_card.zip" too in the Card..?
Advices are always wellcome!!
Regards!
?
Miguel
Angel P¨¦rez Hern¨¢ndez
Alpha Cygni S.L.
c/ San Agust¨ªn, 23
38410 - Los Realejos
S.C. de Tenerife
Islas Canarias - Espa?a
Tlf/fax: 0034 922 34 30 38
?
?nete a Betacygni, la
trastienda: ?
De:
"tom@..."
Para:
Gemini-II@...
Enviado:
jue,10 febrero, 2011 18:10
Asunto:
Re: [Gemini-II] Gemini 2 in our hands... Anything on
display...
?
Miguel
when you go to the site where the Gemini 2 is,
try and take an SDcard reader with you.? You may
have to remove the SDcard from the hand
controller and do the update the hard way.? That
would involve redoing the SDRam card.? It is not
that had of a process.? You could even prepare a
sub-directory on your computer with an image of
the complete SD card before you go.? Then all
you would have to do is remove the card from the
hand controller, format it with FAT File system,
copy the files over to it, and put it back into
the hand controller.?? If you need I can post
the step by step instruction on how to generate
the image of the SD card, or better yet I will
try and put up the latest
Handcontroller SD image, with the latest
firmware change.?? You will also need to make
the main controller have the latest firmware
update to match the hand controller.
Tom Hilton
