开云体育

Ok new ARM installed on G2 Tallboy. ?All went well. ?Dropped flux everywhere. ? Eventually powered installed new bootloader following posted instructions. ?Easy as to do. Updated MB firmware to

FWIW that’s a far superior type of coupler than the standard Oldham coupler. Sent: 13 April 2025 05:18 To: [email protected] Subject: Re: [Gemini-II_io] Dec Stall from Custom Park to CWD [Edited

Paul, and Chip Louie, I went ot hardware bought a variety of size grub screws to fit the Worm Gear Cover. Turns out it is size 6-32 3/16". I now have extras. But that is not the funny thing. I found

Oh, you probably just need to loosen the outer worm block a smidge.? For original straight drive 2-piece worm blocks you need some backlash when warm.? It shrinks a lot when cold. -- Chip Louie

Paul, the mount was well balanced with the Losmandy DSC's before the upgrade. How would I judge if the worm/gear mesh needed adjusting.? I will check it tonight. Chip Louie, Full Gem 2 upgrade kit.

On Sat, Apr 12, 2025 at 05:14 AM, <fishonkevin@...> wrote: > > Hi, > Last weekend got my G-11 Retro-kit installed but rain kept me from doing > Cold Start. Did Quick Start got the Time/Location

On Sat, Apr 12, 2025 at 08:14 AM, <fishonkevin@...> wrote: > > Hi, > Last weekend got my G-11 Retro-kit installed but rain kept me from doing > Cold Start. Did Quick Start got the Time/Location

Hi, Last weekend got my G-11 Retro-kit installed but rain kept me from doing Cold Start. Did Quick Start got the Time/Location all set. Last night I was back out, rolled the roof and got ready for

Thanks Paul and Don. I've received that Gemini 2 from "Chip"....CPU is hot!? 218mA worth of heat.?? Just trying to find if there is anything that caused the burnout before I replace it.?? But

Hi Art, if you use the ASCOM driver virtual hand controller, you can go to the Setup->Troubleshooting Report... option while your Gemini is connected to the PC. Select all options, and press Collect

Hi Dave, no, the JTAG/ULINK2 unit is just for Bootloader update (can also be used to program and debug the ARM CPU, should you feel the need to ;)) What I think you're referring to is the upgrade to

Hi David, those files are not needed when using Keil debugger to flash the bootloader.

Will this same hardware (the Amazon thingy)/software(Keil) update accomplish the upgrade from not 6 to 6 level firmware? Dave

Paul I think that the Objects sub-folder should also contain files: BL_Gem2.bin, and MB_BL_2024.hex? D. Sent: 11 April 2025 12:34 To: [email protected] Subject: Re: [Gemini-II_io] Gemini BOOTLOADER

Hello all, where can I find the G2 logs? I am troubleshooting a "disconnect" problem (per ASCOM logs). Not sure if it actually is an ethernet problem or the mount just simply "checking out". I feel

Good news! Thanks for reporting the issue and then testing the update, Don! It makes sense, but it is an unanticipated benefit that faster booting means that GFU is no longer required to wait minutes

Hi Paul, Great news! ?This new file worked perfectly. ?Attached is a photo of the final confirmation. Also, and this is the best part, no more timeout error messages when updating via the GFU! ?I

Paul, thanks for the suggestion.? I checked the mount last night and the problem didn't happen after almost a week being off; it seems like the firmware update (and/or the new battery) may have fixed

Hi Don, and others, Please try this file ( /g/Gemini-II/files/Latest%20Firmware%20Files/Bootloader%20Update%20Instructions%20-%20April%202025/BL24upload.zip ) instead of the .uvproj

On Thu, Apr 10, 2025 at 09:38 PM, Konstantin Baranov wrote: > > 1. I was told the problem is that some SD cards are 2GB when they should > be 8GB. I don't know more details how exactly is causes