开云体育

When these happen I generally take the cable out and spray some DeoxIT on the RJ8s and then seat/reseat/reseat the plugs at each end and then try again. If I also notice that cable may have been

After powering up the Gem2 controller (V 5.21) last night, I had minimal response from the touch screen on the HC.? Didn't matter if I used a Cold Start or a Warm Start.? If I selected Quick Start,

Thanks Paul - can you also provide more information on how to utilize the last item "MU: Enhancements for PEC precision, drift removal" Ken

Just ordered the factory upgrade service, looks like my timing was good. Thanks, Paul and team.

Thanks Paul and devgroup team! -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena, CA Astrospheric Signature (

Great news Paul.? Thanks for the update. ----------------------- Jim W Phoenix, AZ USA

Hi Folks, An official new version of Gemini firmware Level 6.1 and Hand Controller firmware v1.63 are now available for your Gemini. A few ways to update to this version: 1. Use GFU app (

I agree.? For folks using NINA the Three Star PA P

Hey Tom, Yes, I do, thanks for asking: https://www.astrobin.com/users/noon/ I've pretty much completely rebuilt the scope from scratch which made it much more usable... most of my more recent images

Thanks Paul, it's always right in front of my eyes and I always miss it. Works as advertised now!

Thank you Ryan. That is a nice rig and the clearance looks like heaven.? For the last two nights I had to monkey around with mine waiting for it to get far enough past the meridian so that it would

Tom I believe you will be served well by the RA extension and Pier extension. I've attached some photos that will illustrate the increased mount rotation that you get by raising the OTA above the

Hi John, look under Setup->Configure Telescope menu:

I've watched the Losmandy video with Edward Plumer explaining, very clearly, how meridian flip works with Gemini and NINA. I've used his spreadsheet to calculate the settings for both NINA and

Thanks Ryan, Yesterday I ordered an RA extension kit and a 12" pier extension.? I getting tired of monkeying around with it.? I will probably get the tucked motor upgrade next. I hope that these two

I use NINA for imaging sessions with my Gemini mount. It controls the camera and its cooling as well as monitoring guiding through phd2 with my guider camera. It has many useful software plug-ins. One

Paul Kanevesky and David Hill, Thanks for the feedback on the USB connection situation.? I used a USB 3 cable to connect my laptop to the Gemini.? Fired it up and it worked perfectly.? I can now

I have a substantial 10” Newt on my G11G and the 12” pier extension allows me to image up to 55 minutes past the meridian. That being said, an 8” would have worked as well. I also have the RA

Hello, I am not sure if this is the correct forum but I will ask anyway.? I have a G11, non-tucked in motors, Gemini 2 recently upgraded.? When I use the G11 with a short refractor I can set the

On Sun, Nov 3, 2024 at 12:47 PM, <kevinwalsh324@...> wrote: > > I got my new G11 this past Spring and I went through the various YT > videos. > > > I used this video done by Scott to build a