开云体育

Well if it takes that long I'll cancel the Amazon order and just roll down to Losmandy's shop and reprogram my G2 minis on their bench.? Maybe I should just cancel now, I need to go pickup a Loamandy

My main concern is the right side.? On the left side the circuit board and standoffs are offset enough and should not be an issue with normal Losmandy supplied wing nut type fasteners.? But II think

Isn't it always the way? ;)

Good update, Chip! The PCB looks identical, but the wing screws look like they could cause PCB damage if screwed in too far. Thanks for the warning! Regards, -Paul

I went out to Amazon this morning to cancel my order and, of course, now it finally shipped after 16 days.

Just a thought for Losmandy with these new cases-put a "bottom" on the "through nut" instead of an open "through nut" for the wing bolts.? That would certainly prevent disaster. Chris

The clearance is fine with the new one-piece machined ears on a new MA or newer tripods.? The issue might be more likely to be a problem on older tripods and adapters with the thin welded on sheet

Oh nice new car for G2. This problem with wing screws holding the unit case is a problem on G1s ….but yes. Can see the issue here with this case. On G1s, I used washers to space the wing screws

Ok,. here's the new Gemini 2 case face and insides showing the circuit board.? The Gemini 2 mini had L6.12 and HC.6.3 with the new bootloader.? It has a? noticeably shorter boot up time and HC

Thanks again Chip & Paul. ?I’m going to go ahead and replace the battery. ?Unfortunately, the weather has made a turn for the worst, so it may be a while before I can confirmed if this had any

We'll see, I ordered from Amazon with a 7 day delivery date.? But Amazon vendors frequently promise one thing then deliver weeks late or sometimes never deliver on items like this.? I have had this

Paul, I just picked up a new Gemini 2 with the old 1999 G11s that Scott has done the full Monte on.? This new G2 came in a different case it's no longer the milled from solid aluminum, it is now a

Hi Mike, Like Chip, I think it's worth replacing the battery, just to be sure. Different versions of Gemini over the years had different 3v battery holders and had different current draw that

Hi Chris, I suspect the new tariff policy is causing significant delays, especially for delivery from China. The unit you ordered from eBay should work just fine.

When this new Bootloader was announced, I immediately followed the link to Amazon and placed my order.? That was April 8.? As of this morning, it still has not shipped.? I am wondering if this item

Hi Mike, Well you are at that point where if replacing a battery fixes it who cares if we're grasping at straws?? The battery backup circuitry is flakey and some people have no issues with a battery

Paul, That's what I was thinking.? However, I can assure you that the Reverse Dec checkbox was not checked.? In fact, I was thinking about setting the to Rev Dec so it worked as before. Here is

Hi Joe, I meant to ask you this previously but when you pulled out the battery did you by chance verify the old and new battery voltage with a DMM - digital multi meter?? This would be a couple of

Hi Doug, glad to hear you got it solved! Driver and installer issues with Windows are notoriously painful to troubleshoot. Frequent reboots, uninstalls/reinstalls, and switching to another computer

On Mon, Apr 21, 2025 at 06:35 PM, Jay Freeman wrote: > > Update on my problem: I called Losmandy and spoke to Tanya; she said that > about half a dozen new Gemini-2 units had made it out the door