开云体育

My G11T is so good I don't bother with autoguiding. I've mostly been using a TSA-120 reflector with a ZWO2600 and an ASIAir, and if my polar alignment is solid I have no trouble with 300 second

Hi Jeremy, I wanted to jump in and mention a couple things as a new (actually born again) hobbyist. ?I did basic visual stuff for many years with a Celestron CPC1100. ?Recently retired (for sure

On Mon, Apr 7, 2025 at 02:31 PM, Paul Kanevsky wrote: > > Hi Folks, > > René, as usual, has been busy with Gemini improvements. The new Bootloader > is an update to the original one that was created

Hi Jeremy, It's not that complicated.? The way the autoguiding apps work like the free standing PHD2 guiding or an integrated system like ASIAIR etc. require certain conditions to be met in order to

I know that the M: file will no longer be created by the firmware update process, but I don't know for sure if you'll be able to just delete it after the bootloader update ( René , do you know?) If

Thanks to everyone who responded to my question about autoguiders. It seems I’m so new to the whole thing I didn’t even know the right questions to ask. I’ll do a little more research on exactly

I am one of those people with the M:? file issue so I will definitely be doing this update. Question-After updating the bootloader, do I just need to power up Gemini and then that M: file issue will

Daniel, The 8 GB was chosen by Tanya Kennelly since it works w/o any problems for the new boards she upgraded. You can give your old SD card a chance and report here. Regards, René Am 08.04.25 um

Thanks for your answer. In instructions it is specified that a microSD card higher than 8Gb is needed. I assume that this implies that the new bootloader do not work for smaller cards, including those

Thanks!

Everything, including the Amazon link, is in the instructions. Here’s the link: ULINK2 Emulator Original Firmware Support for MDK5.0 Cortex M4 Gold Plating 11 x 5.5cm https://a.co/d/hRQRW5Y

Can someone share a link to the exact programming device needed? I went to Amazon just now, and it was far from obvious.

I doubt you could brick a Gemini by bad or interrupted programming. I assume it's possible if you don't align the connector pins the right way. If you do connect it

I realize that, Rainer, but even without a Gemini, it's still nice to see you! :) Regards, -Paul

Thanks Paul but I do not own any Losmandy with Gemini anymore regards Rainer

Big thanks to René, Paul, David and all the Gemini team for providing such support to the system. I have not encountered the M: file issue, and do not know what this issue is, may be because my

I understand and have experienced the clicks when the motors are not connected. This is normal behavior. Dave

Thank you Paul and René!

I am away on work in Carlsbad NM and intend to bring back my setup next time I go home. I also bought a stellarmate pro controller. I actually like the interface/app. So what I have done was brought

Hi Folks, René, as usual, has been busy with Gemini improvements. The new Bootloader is an update to the original one that was created when 2GB SD cards were all that was available :) The new