开云体育

I get it Chip, I just was not clear I guess. I should have said eliminating instead of consolidating. I have a large power supply and your diagram pretty much summarizes what I planned. Does anybody

Here is how the system is connected.? Sorry for my sloppy illustration. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena, CA Astrospheric Signature (

Not sure what you mean by "consolidate my power."? If you mean you need a different power supply or portable power supply that is an easy fix.? Just go to your local hardware store and look for a

As a controller to control the process of data gathering the Eagle is overkill. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South Pasadena, CA Astrospheric Signature (

I am fairly new to Gemini 11 having acquired a very used G11 with G2 back in November.? I started using it with Stellarmate on a RPI4, mounted on the scope with a homemade power distribution box

I think I will give it a try. I looked at the Eagle while doing my research and can afford it, but I'm not actually sure I actually need it.

What I'm hoping to do is consolidate my power. As it sits, I will need at least 4. 1. Gemnini 2.NUC 3.ASI 2600 4. Mini Router. Five if I use my multi port USB I was hoping the ASI or stellarmate could

The AsiAir is running the PhD guide engine. That produces the PhD guide logs you may be familiar with. You should remember that the AsiAir requires you use ZWO’s cameras, color wheel etc. so if

On Sun, Feb 9, 2025 at 11:21 AM, <drice34@...> wrote: > > > > > > > > I just posted this on CN just so I could get as much info as I could. > > > > The other alternative is IF they make a

On Sun, Feb 9, 2025 at 11:21 AM, <drice34@...> wrote: > > > > > > > > I just posted this on CN just so I could get as much info as I could. > > > > The other alternative is IF they make a

I cannot speak to the StellarMate Pro device, but I can say that I use StellarMate X on a MiniPC and it works just fine. I prefer the ability to use PHD2 for guiding.

I’ve used them both. The Air is very easy and I can in no way recommend StellarMate.

I just posted this on CN just so I could get as much info as I could. The other alternative is IF they make a central power distribution block. However I would like to eliminate the mini router and

I tested the mount yesterday afternoon and it was behaving, so I went ahead and did the reset to defaults. I set the limits back to what I had and will see what happens during the next set of

Thanks Paul. I'll try your suggestions and see what happens. The problem is that it is intermittent. I ran the interferomter three times this week and it only happened on two of the nights but it was

On Fri, Feb 7, 2025 at 11:47 AM, Rick Scott wrote: > > My G-11 with Gemini 2 has been having problems where it stops tracking and > displays that the western limit has been reached. The problem is

My G-11 with Gemini 2 has been having problems where it stops tracking and displays that the western limit has been reached. The problem is that it’s not really at the limit. I’ve even increased

thanks for update Kurt cheers -- Brendan

Finally had a chance to check both servo motors. Even though the DEC motor had no markings on it, they are both identical to the SVM-HT. Thanks for the help on this!

Hi, Paul! Thanks for the tips! I'm looking forward to using them in my future astrophotography sessions. Best Wishes and clear skies! Russ