开云体育

I use NINA to automate skyflats in the AM. I can send you a screenshot of my sequence in a few days. Basically after imaging my mount parks at HOME and waits for the sun angle to get to the desired

The Flat Wizard in NINA has a native Slew to Zenith function. Cheers, JB

Just move the scope to the desired flats position (zenith), and then use the HC to set Home Position there: From NINA, you can use the Sequencer command Find Home to tell Gemini to slew to this

GM811g user here. I want to automate sky flats at the start and end of each sequence in NINA. However, NINA only provides a "Park" option and not the other park options available in the HC or Gemini

Hi Edward, Either one should work, although I used the PicKit 3 software myself. Regards, -Paul

Thanks Chip, I sent my Gemini in to Losmandy about 5 months ago, they installed version 6.? The polar align is not really a problem; it is more of an idiosyncrasy.? The speed of rotation seems to

Paul, Of the options you linked for the PICKit 3 unit I got, do you recommend the PICKit 3 V3.0.3.3 or the MPLabX v4.15 approach? -- Edward

I have attached a pic of my hc firmware readout.Sent from my Verizon, Samsung Galaxy smartphone

The issue of PA will slow/motion rotation to 60degs is easier then that. Soon as rotation should begin, look as the speed selection in lower left of HC. Simple toggle to “slew”. Always it goes.

I am currently working on figuring out what firmware i have. Was told it was L6 by previous owner. I need to confirm myself when I get home today. Mine is guilty of the quirks mentioned in a previous

We can't help if you don't respond.? What is your rig configuration and what issues have you had?? Let us know if you still need help. -- Chip Louie Chief Daydreamer Imagination Hardware

On Mon, Nov 18, 2024 at 04:11 PM, <Tjkallenbach@...> wrote: > > My experience is that while I still experience "problems", most of them > have work-arounds.? For example, when I run the polar

My experience is that while I still experience "problems", most of them have work-arounds.? For example, when I run the polar align routine in the air, the degrees of rotation will not count up.?

Thanks Paul...on to it.... -- Brendan

I've used PicKit2 and PicKit3 programmer software instead of MPLab with good results on multiple Gemini units. Installers for this software are still available from the Microchip website: PICkit 2

It is interesting to see that some people repeatedly have issues with their ASIAIR and Gemini systems while the vast majority do not.? I was a Losmandy Gemini-2 L6 beta tester and the Gemin 2 L6 beta

Acting goofy happens to many ASAairs on rare occasion. Your issue: you have some firmware loaded onto the SD card and respective unit acts goofy; either due to corruption or a firmware update failure.

Sure, please post details of your system and the smart device you run the ASIAIR app on. For example my Gemini 2 mini and ASIAIR Plus both use Ethernet to connect to a GL.iNet Slate-AX1800 travel

Can someone point me in the direction of getting my mount working with the asiair. Some things function but not all.

quick update....you can use MPLABX downloader then install MPLAB IPE5 or MPLAB IDE (don't know that ver) instead of full package...see here. (