开云体育

The reviews of (an earlier) GL router used in conjunction with ASIAir Pro were not promising at the link below (admittedly from two years ago):

Zolt, -? do you use this only to connect to the Gemini-2?? For imaging could you also plug your USB3 data line into the router and have a complete WiFi setup? ----------------------- Jim W Phoenix,

Zolt, I had been using the old TP-Link na

Too much hate already. Instead love that you have it working now and learn from your mistakes. -- Chip Louie Chief Daydreamer Imagination Hardware Astropheric Weather Forecast - South Pasadena, CA

I changed the gateway AND used a google tip to go through the control panel to install my ethernet IP address. That worked. Thanks to all for your help. I hate new computers. Mike Sent from

yeah that seems to be an issue for saving. for a direct IP connect i'm not sure the gateway is critical, so you can try changing it to something else, or the ip address of the gemini

+1 to Art and David! It’s prob not allowing you to save b/c it duplicates the (incorrect) gateway address. -Dale

Your gateway should not be the same IP. GW is probably 192.168.1.1 Ping it to verify. Open a cmd window and type ping -t 192.168.1.1 to see if you get a response

Hi Mike This is a Windows 11 quirk. It's definitely possible to save it, although I forget the exact details. You'll want to hunt this down as a Windows 11 thing (google may give you some good leads

Looks like you set the IP Address and Gateway address to the same value. They should be different. Another working ethernet device will likely verify the proper Gateway address. Also, usually you

Thanks Brian, I was unaware of that particular video. I followed all your instructions and ran into a snag when I tried to configure the ethernet side on my Windows 11 computer. It doesnt look quite

A travel router?! I travel full-time w/ my AsiAir and G11 for many years now. I also test AsiAir updates on a few other Apple devices before I go production with my primary iPad. What is clear is the

Do you have a recommendation for a travel router? Could I still have a wired connection to my home router? Or do you then connect the Air to the WiFi using Station Mode??I've been using a wired

Hi Mike what instructions did you follow? The details depend on how you are connecting: if you are doing a direct ethernet connection there's a tutorial here: https://youtu.be/b4J5tQxvH9E if you are

Hi I used the ethernet connection from my old Dell Win10 machine with no problem. I followed theGemini II setup instructions and it worked great. I now have a new Lenovo Win 11 laptop and I cannot get

The ASIAIR / Gemini-2 combination works great! I have used USB to connect the two no problem. That said you need to used the correct USB ports on both for best results. On the Gemini-2 you must use

Hi George, Gemini.NET doesn't automatically re-read the changed parameters unless it knows that it needs to do so. If you update the model through Gemini.NET, it'll automatically update these by

I've just set up a new observatory with a new-to-me, never used Losmandy G11G wiith Gemini 2. My goal is to control the G11 with Starry Night or Cartes du Ciel (I like both well enough). My first

A couple more fixes. Konstantin Baranov fixed the tracking rate selections. It looks like they've been broken for a long time. I fixed the "tracking ON / OFF" status in ekos. It looks like those were

I agree with Zolt - whenever my ASIAir fails to recognize/connect to my G11G, it is always due to the cable. Either the connection is poor at the ASIAir end (loose), or the USB-B (printer) cable