On Mon, Mar 3, 2025 at 07:16 AM, David C. Partridge wrote:
I selected 6.1 and asked it to update everything including the HC.
?
HC wasn¡¯t updated.? I needed to copy the gemhc.bin for 1.63 to the HCFirmwre directory on the SD car using Filezilla and then reboot to get it to install it.
?
Cheers, David
?
?
?
Normally if you have the right boxes checked the HC is enabled to be downloaded but cannot be updated until you reboot the Gemini 2 by powering off then powering back up.? You get a updating HC firmware message which can take a long time but eventually it will update and reboot.? Sometimes the Gemini 2 need to be power cycled to get it to wake up after this which AFAIK is normal.?
?
If you have connected to the Gemini-2 over your LAN and can access the Gemini-2 using the network you can also just copy the HC file to the right directory in the Gemini-2 and when the Gemini 2 is power cycled it will update the firmware as above.? ??
?
--
Chip Louie Chief Daydreamer Imagination Hardware?
Astrospheric - South Pasadena, CA?
Chip Louie