This may need to be a different thread, but something else that has been happening at L5 and L6 even with updating the firmware.?
?
When i click the DEC or RA button on the touch screen OR the bottom physical buttons it will occasionally slew the wrong direction. If I press the opposite button for each direction it continues along the same pathway.?
?
So for example if the if I am trying to slew the RA motor to the west I would click the appropriate button. I will press the touch screen or physical button to slew to the west. However rather than slewing west it will slew to the east. I will release, and when I hit the button again it will continue slewing in the same, wrong, direction. when I go back to the opposite directional button. It will continue to slew east. It is not until I repark at counterwieght down, unpark and try to slew again that this will fix.?
?
This same issue will occur with the Dec axis.?
?
It is not everytime but does happen consistently.?
?
What will make this happen more often than not is when I try to manually slew the RA and Dec axis simultaneously. It happens far more often in the Dec axis than the RA.?
?
Any thoughts here?
?
I don't think this is related to my initial problem as there usually is a clear fix by re-parking the mount.?
Ryan