I am at a complete loss. I will boot up my gemini II. connect to my pc with the gemini ascom driver, and try to slew to a target to image. Rather than slewing to the correct part of the sky (scope pointing east) it will point west and at the ground. I get no errors, I have changed nothing in my settings. My PC has not changed or updated. This will happen about 50% of the time. I have changed batteries and have checked the power supply.?
?
There is no rhym or reason to this. Also when trying to calibrate PHD2 with callibration assist I try to calibrate with the scope on west side of pier point east. Irregardless of what option I select in the calibration assist screen the scope will slew to the west side of the pier (as if it did a meridian flip) and try to calibrate there.?
?
I have to turn the mount off, unplug all the connectors, and restart my pc multiple times to fix this problem. Some times it only stops when I turn everything off for hours at a time and reboot.?
?
This started happening after my L6 update.
?
And to address some thoughts:
My location is accurate with Longitude and Latitude
My location, date/time are all accurate each time I boot up
My location in NINA/PC is accurate and matches my scope.?
?
When it starts working it slews appropriately callibrates well, and does a routine perfectly. Unfortunately that is less than 50% of the time.?
?
I have no logs as I'm getting no errors.?
Ryan