Hi All,
?
I recently hooked up a Linux PC/indi driver to my Gemini 2, and it seems that ever since then my ASCOM driver or Gemini 2 does not track in sidereal (RA). I¡¯ve reset my USB Settings in Windows, I¡¯ve reset my Gemini 2 controller, powered off, and then cold restarted, and I¡¯ve also re-inputted my mount¡¯s settings. Still, when the mount is commanded to slew to a point, such as when calibrating PHD2 guider or starting a sequence in SGP, it does perfectly but instead of the expected point stars, I observe star trails and no sidereal tracking upon reaching the target point. I¡¯ve uploaded a set of troubleshooting logs located in files/ ¡°promero 12-3-2024¡±. A look at the gemini webpage for iphone shows nominal voltage and battery voltage.
?
I have tried going back to the .25 ASCOM driver version, but nothing changes. I have the latest firmware updates. The mount is a MI-250.
?
In a perhaps related issue, when used, my ethernet connection disconnects after a minute or two, but my USB connection seems stable. This started occurring after I changed my router model and network physical setup. All other network devices work fine.
?
Clear Skies,
?
Paul
