On Sun, Feb 19, 2023 at 08:09 PM, Frank Wielgus wrote:
A few posts below this one, I attached an ascom log for one of my troubleshooting runs.? I looked and the Mf# is in there.? Whether done at right time or not is beyond me.
That's correct. There is a meridian flip command in the log, :Mf# issued, it appears to happen at HA of 0.026183, or past the meridian. The mount reports being on West side of the pier. The software asks to go to East side. The command is sent... Gemini reports success, yet, no motion occurs and hour angle continues to increase past the meridian.
18:13:32.598 Serial received:? ? ? ? ? TID:8 [0]: :GH, +0.026183
18:13:33.314 IT:SideOfPier.Get? ? ? ? ?TID:6 [Enter] pierWest, 42.64
18:13:33.314 IT:CanSetPierSide.Get? ? ?TID:6 [Enter] True
18:13:33.314 IT:SideOfPier.Set? ? ? ? ?TID:6 [Enter] pierEast
18:13:33.315 Transmitting commands? ? ?TID:8 [2]: :Mf#
18:13:33.315 Serial Transmit? ? ? ? ? ?TID:8 [0]: :Mf#
18:13:33.317 Serial received:? ? ? ? ? TID:8 [0]: :Mf#, 0
18:13:33.344 Serial received:? ? ? ? ? TID:8 [0]: :Gv, T
18:13:34.605 Serial received:? ? ? ? ? TID:8 [0]: :GH, +0.026745
Paul Kanevsky