Re: Gemini 2 in our hands... Anything on display...
|
Tom, Thank you very much for your email. I have a "new" Micro SD card with adapter, I think I can use this to redo the SDRam card.. A step by step instruction is always wellcome, but I understand that is: 1. Format it with FAT system file 2. Copy the gemhc.bin to the root in the directory of the SD card. 3. Then I?m not sure if I need to copy the contents of "HC_SD_card.zip" too in the Card..? Advices are always wellcome!! Regards! ? Miguel Angel P¨¦rez Hern¨¢ndez
Alpha Cygni S.L.
c/ San Agust¨ªn, 23
38410 - Los Realejos
S.C. de
Tenerife
Islas Canarias - Espa?a
Tlf/fax: 0034 922 34 30 38
? ?nete a Betacygni, la trastienda: ?
De: "tom@..."
Para:
Gemini-II@...
Enviado: jue,10 febrero, 2011 18:10
Asunto: Re: [Gemini-II] Gemini 2 in our hands... Anything on display...
?
Miguel
when you go to the site where the Gemini 2 is, try and take an
SDcard reader with you.? You may have to remove the SDcard from
the hand controller and do the update the hard way.? That would
involve redoing the SDRam card.? It is not that had of a process.?
You could even prepare a sub-directory on your computer with an
image of the complete SD card before you go.? Then all you would
have to do is remove the card from the hand controller, format it
with FAT File system, copy the files over to it, and put it back
into the hand controller.?? If you need I can post the step by
step instruction on how to generate the image of the SD card, or
better yet I will try and put up the latest
Handcontroller SD image, with the latest firmware change.?? You
will also need to make the main controller have the latest
firmware update to match the hand controller.
Tom Hilton
|
