IO would be interested
Henning Weddig
DK5LV
-----Ursprüngliche Mitteilung-----
Von: Adrian Rees (MW1LCR) <mw1lcr@...>
An: G6LBQ < [email protected]>
Verschickt: Mo, 31. Dez 2018 7:07
Betreff: [G6LBQ] CDG2000
Hi all
Apologies if this isn't the correct forum...
I have a CDG2000 transceiver "kit" for sale.
(The CDG2000 was a very high performance transceiver documented in
RadCom a number of years ago. It featured H-mode mixers and a
receive chain that challenged the best of commercial receivers
performance).
I am selling a set of printed circuit boards, screening boxes and
the majority of components (pretty much all of the components
needed to build the transceiver, but including all of the hard to
find components. You? need to add a VFO & display).
All documentation will be included.
?100 plus postage & packing.
73
Adrian M1LCR
|
Hi all
Apologies if this isn't the correct forum...
I have a CDG2000 transceiver "kit" for sale.
(The CDG2000 was a very high performance transceiver documented in
RadCom a number of years ago. It featured H-mode mixers and a
receive chain that challenged the best of commercial receivers
performance).
I am selling a set of printed circuit boards, screening boxes and
the majority of components (pretty much all of the components
needed to build the transceiver, but including all of the hard to
find components. You? need to add a VFO & display).
All documentation will be included.
?100 plus postage & packing.
73
Adrian M1LCR
|
Re: Search for Kit or PCB about the 20 W PA
Been clearing out the loft over the christmas break, If anyone is interested I have the following Transceiver items for disposal:-
1) Built and tested PA module (no heatsink)
2) Built and tested LPF filter module
3) Unopened "G6LBQ Digital VFO Mk3" kit. Includes PCB, LCD, SI570, CPU and components
For more details and photos visit?
Dave
G4FRE
|
Re: Search for Kit or PCB about the 20 W PA / PCB's & VFO available
Hello all,
(FAO Alain)
I have been clearing out my shack and
have come accross some G6LBQ multiband BITX stuff.
Specifically I have the following
available:
1 x MK2 exciter PCB
1 x LPF PCB
1 x MK3 Linear Amplifier PCB
Note these boards are unused, non
populated.
Happy to ship world wide.
I cannot remember what I paid for them,
and will have to look that up if anyone is interested....price
will be what I paid for them.
HTH
Adrian M1LCR
toggle quoted message
Show quoted text
Hello Andy and the group,
Could anyone sell me the KIT for the 20W PA or just the PCB ? I
could even consider a fully mounted PA, but I would rather get it
it new, not used.
Thank you for reading me. Have a Merry Christmas and a Happy New
Year 2019 !
Best Regards,
Alain F4HFS
|
Search for Kit or PCB about the 20 W PA
Hello Andy and the group,
Could anyone sell me the KIT for the 20W PA or just the PCB ? I could even consider a fully mounted PA, but I would rather get it it new, not used.
Thank you for reading me. Have a Merry Christmas and a Happy New Year 2019 !
Best Regards,
Alain F4HFS
|
|
|
Dear Andy and all,
Greetings from 5Z4BT !
I would like to purchase PCBs for the Mark 2 Exciter. Are there any available from anyone ? Any help greatly appreciated.
73s Sakti
|
Re: Search UBITX multibands
Hello Antonio
I try to log on but no luck….
Try to reset 3 times? the password but no luck again
I got the? following
More Information Required: ??Correct Username
And stucks there …
?
?
Please advice
Thank you
73 de Tomaso
SV2CLJ
?
Sent from for Windows 10
?
toggle quoted message
Show quoted text
From: iz8ccw@...
Sent: Thursday, April 19, 2018 7:59 AM
To: G1FXB@...
Cc: [email protected]
Subject: Re: [G6LBQ] Search UBITX multibands
3 times
Sorry dear I have bad information, I just write to G6lbq because Italian friend council me the multi and by him.... I undestund bad the name , I think G6lbq multibands have ubtix?name... and bitx is the mono band version... sorry again?
I search the multi and version for try in our future activity.. ?73 Ant?
____________________________
.'. IZ8CCW .'. Ant Cannataro
?
Da: "Alan de G1FXB" G1FXB@...
Data: Wed, 18 Apr 2018 19:56:06 +0100
Oggetto: Re: [G6LBQ] Search UBITX multibands
Hi Ant,
The main focus for this group is the multi band BiTX design by G6LBQ
You may find that Farhan's original BiTX20 group a better place to put a wanted ad, as the uBitx is another one of his designs?
Try:-
[email protected]
?
There have being a few being advertised for sale by people who have since changed their priorities.
Best regards Alan
hi, i m interessed to buy a UBITX multibands, for used and testing in next dxpedition. any
proposals please via email
iz8ccw@... 73 Ant
|
Im looking for:
Raduino V-1.01 , startup firmware.
I can not find
|
Re: Mk II Scratch-build May 2018 -- some questions
To conclude this thread, here's a blog post and video describing my mostly complete G6LBQ SSB/CW transceiver project, commenced in April, on air in Sep/Oct.? Hope you enjoy.?
??
Thanks again Andy and others on this group for help and engagement during this winter project.
regards and 73 Paul Vk3HN.? ??
|
i'm interested in pcb's for irwell and pcb for G6LBQ multiband mk2.
73!?
Ionut, yo5oic.?
|
Paul
Are you building the Exciter Mk2 ? I
guess so.
I ordered some of those crystals in case i get the 'urge'.
glenn
On 1/10/2018 7:51 AM, Paul VK3HN wrote:
You can see them in the photo, I believe they are
11.059mhz, one of the UART clock frequencies.?
VK3HN.?
On Sun, 30 Sep. 2018, 17:30 Glenn, < glennp@...>
wrote:
Possibly
also interested in some or all the PCB's.
What freq. are the crystals in the xtal filter? Where do you
get them?
glenn
|
Thanks Paul.
Found some on ebay.
glenn? - vk3pe
|
You can see them in the photo, I believe they are 11.059mhz, one of the UART clock frequencies.?
VK3HN.?
On Sun, 30 Sep. 2018, 17:30 Glenn, < glennp@...> wrote: Possibly also interested in some or all the PCB's.
What freq. are the crystals in the xtal filter? Where do you get them?
glenn
|
Possibly also interested in some or all the PCB's.
What freq. are the crystals in the xtal filter? Where do you get them?
glenn
|
Hi Andy,?
I am also interested in kit or PCB's,? may take me longer to save for kit but if I had to vote on or other a kit would be awesome.??
Thank You Sir,?
73 de Seth W8FG
On Thu, Sep 27, 2018 at 4:35 PM, g6lbq via Groups.Io <ah.electronics@...> wrote: Hi Adrian
Thanks for your interest in the project, I have added you to my list of those possibly interested in PCB's or kits and these will be made available to those who register an interest first.
Regards
Andy
|
Hiya Andy - Happy to hear that you like my silly videos :-)
And thanks for reminding me about Wellgood.
I had bookmarked George Smarts website some time back and I forgot about it , then when I remembered I looked in my zillions of web browser bookmarks and couldn't find it.
Because you gave the name in your message I was able to find it in my bookmarks and go to the site... :-)
What really shocked me was how George X-rayed the Welgood box and it showed veroboard (strip board inside) . YUCK ! .
Are they made in someones back yard ?
For the price they are sold I would expect a bit better level of construction than that.
But that George Smarts did a great job and his recreation looks real nice.
I should add this to my list of projects , but in all honesty , if I didn't add even one new project to do , I would still have enough to keep me going for at least 5 years.
gregW:-)? OH2FFY
|
I am interested in a Through-Hole kit.? I have tried SMD assembly and I am no where near steady enough to place the parts le alone get them successfully soldered.
|
Hi Reghu
Thanks for your interest in the project, I have added you to my list of those possibly interested in PCB's or kits and these will be made available to those who register an interest first.
Regards
Andy
|
Hi Ron
Thanks for your interest in the project, I have added you to my list of those possibly interested in PCB's or kits and these will be made available to those who register an interest first.
Regards
Andy
|
SV2CLJ Thomas
Paul VK3HN
Seth Lavinder W8FG