开云体育

Chuckr, Sounds like the ubitxes. that hfsignals sells. if operating close proximity to a large signal, a couple of transistors go bye bye when the heavy signal is received by the transceiver. I

good ideas!!! maybe a board added either internally or externally for ALC?Maybe an alc circuit to give indiction by LED.This would really help in keeping the g-106 clean on output along with

Greetings all, I have gotten my DE19 digital interface working with Winlink Express as well and thought I'd post/monument some screen shots for set up reverence. I'm using Winlink Express on an old

Hey Matt, Yes, I did have it going with the ICOM setting using a different control function in FLDigi. I can’t remember the tab off the top of my head. It worked while I was set up to listen but

I haven't worked with Fldigi, but I do use the Icom 7100 rig setting on WSJT-X for my G 106. Have you tried different rig settings with your set-up? I hope you get it going. 73 de

Just getting the DE19 interface set up with FLDIGI here and came across some documentation I want to archive for the group. Found this setup with a link for the RigCAT xml (

Here is what I was thinking of, from my old uBitz days. https://ubitx.net/mod-tx-compression/ Available from Ali Express 2167 Preamp

Jamie hi, Great thoughts. I also have some “old” junkyard parts from uBitz days, was thinking of trying them out. Will look to you for your results. Pretty cool radio so far. -73- Frank

The microphone connector on the G106 is an RJ-9, not an RJ-11. 73 de KB2GGF -Matt [email protected]> wrote:

I need to get a few supplies for making some adapters, but I do plan on trying some different mics on the 106.? I modified a FT-817 mic to have the Heil HC-4 capsule and it has a RJ45, so I could set

I drilled a hole in the microphone, maybe 3/8” in diameter or so. I tried an 1/8” but there was not any significant change. The 3/8” did the trick It could be better but I am somewhat

Could you direct me to some reference materials on this Frank? I'm new to the G106 as well but I am near 100% CW so when I did play with the mic I noticed that it's not getting much of a raise out of

Curious, I updated to the latest F/W and drilled the hole in microphone, significant improvement. Has anyone tried a different microphone? An electric(sp)? an old Heil MC4? de KG9H

I know of none unfortunately.? ?This is the biggest issue with any product from Xiegu.? The only repair service is in China.? I wish they would take a lesson from Icom, Kenwood, Yaesu and

Hi all, as with many reaching my age ... ?with eyes failing, hands shaking and patience matching a Lion about to devour dinner, repair of ham radio is gone to the way past side! ?This G106 was

Anyone do or know someone who does or can do repairs on the G106 in the US?

I've had mine since July here and have about 50 contacts on it Jamie, One of the 1st things I did was make up a headphone adapter as I work CW pretty much all the time. You'll see the RJ11 adapter

hi Jamie Nice radio indeed. Maybe of interest: I added a tilt stand to the G106. See my website for details: https://pseudovoice.com/geen-categorie/g106-on-its-feet/ 73's Robert

Picked up a new G106 from the Radioddity table at Huntsville Hamfest last weekend and have been testing it a little.? It came out of the box with the latest firmware at 1.3 already. Anyway,

Having some difficulty getting the CAT setting right with the SKCC and NAQCC loggere software. It seems to work fine with FLDigi as an IC-7200 but not with the other two... Anyone have any luck with