I drilled a hole in the microphone, maybe 3/8” in diameter or so. ?I tried an 1/8” but there was not any significant change. ?The 3/8” did the trick
It could be better but I am somewhat satisfied with the results
It could be improved I would think. Just Google it
I would like to see better high end - why I posted?
BSEE, ? AASEET, ? FCC Lic.# PG-18-19178, ?KG9H
toggle quoted message
Show quoted text
On Aug 28, 2024, at 6:09?AM, Malachi via groups.io <malachi.doane@...> wrote:
?
[Edited Message Follows]
[Reason: wanted to add #mods for a seacharable tag]
Could you direct me to some reference materials on this Frank?
?
?I'm new to the G106 as well but I am near 100% CW so when I did play with the mic I noticed that it's not getting much of a raise out of the meter when I speak and man is the mono hearing awful when using headphones.?
?
? I did the front headphone mod here for Morse work (it steals away the mic plug) but I've also seen an interface box design over at thingverse.com? for the best of both worlds.
?
? So what sort of work did you do on the mic?
?
?Thanks,
?
?de N2QFD// Mal
?
#mods
