Did you try calling yaesu?
--
Leonard K. Pennock (AD7AS)

On January 16, 2021 3:37:45 PM MST, "G4IJL via groups.io" <p.chapman707@...> wrote:

Bad luck. I cannot find new stock. It looks like an appeal on here is the only chance. Maybe someone has a ruined radio and still has the accessories? Good hunting.

#51625

Take a look at a universal CB/Ham radio mount.

Here are a couple from Amazon UK:

Here is one from Amazon US:

73,

Larry - K0LEJ

Show quoted text

On Sat, Jan 16, 2021 at 4:38 PM G4IJL via <p.chapman707=[email protected]> wrote:

Bad luck. I cannot find new stock. It looks like an appeal on here is the only chance. Maybe someone has a ruined radio and still has the accessories? Good hunting.

#51627

开云体育

Over the years, I have made several brackets for different radios by bending proper sized, 1/8 “ thick aluminum plate into a U shape. Then drilled mounting holes to accommodate the radio and permanent mounting. And, then painted it...black. A metal shop can make one in a jiffy. Make sure measurements allow for a 1/2 “ space between the radio and bracket.

?

---------------

Regards,

?

Tony

VA7TF? VE7ACF

?

Show quoted text

From: Leonard K. Pennock
Sent: January 16, 2021 2:52 PM
To: [email protected]
Subject: Re: [FT-857] WTB FT857D

?

Did you try calling yaesu?
--
Leonard K. Pennock (AD7AS)

On January 16, 2021 3:37:45 PM MST, "G4IJL via groups.io" <p.chapman707@...> wrote:

Bad luck. I cannot find new stock. It looks like an appeal on here is the only chance. Maybe someone has a ruined radio and still has the accessories? Good hunting.

?

Virus-free.

--

+++++++++++++++

Tony
VA7TF? VE7ACF

5C28B9D34CB84F429DA565E03B1B2030.png

Mike

#51628

All,
?Thanks for the reply's and information and yes I did search the Web and found all the major dealers out of stock. Just to be clear this is not a life and or death have to have I made my own mounting bracket that works just fine. I just like to keep things original and complete when it comes to my radio equipment (and most other things as well) So if I run onto a bracket that no one needs or wants that would be great if not Oh well life will go on. By the way Tony VA7TF I only use 1/16 on each side of the radio and the screws fit as they should if i had used a 1/2 inch the screws would not have reached without having to deform (bend out of shape) the bracket. Again thank you all for the reply's. Take care stay safe
73's
ke4ska

#51629

The 1/2 inch is between the radio top/bottom and the bracket.?
Buzz
KD4CXI