开云体育

Hy. I Had the Same,... After master reset. Everything was fine... Check ist Out.. Good luck Andy DF1HF -- Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.

Peter: This behavior for several Yaesu radios (857, 817, 897) is mentioned in the SatPC32 documentation.? (Hints->Yaesu, see the Reame(Yaesu).txt file).? Manual tuning (front panel) works, but

Yes that is a limitation of the 857 when using for satellite operation.? It really isn't a big problem if you keep your transmissions short. Don K9AQ

Hello Yono, I tried it here, and indeed, the 857 will not accept frequency change commands by CAT during transmit. I am pretty sure the CAT interface itself functions, as I use CAT command to switch

Dear all, While qso with a friend that uses a FT-857 thru a linear satellite, I noticed he always drifts upwards. He said GQRX was not updating the freq while TX and he has to release the PTT button

Thank you everyone. I learned a few things. I'll pass the info on to my Dad. 73, Mike / KA4CDN

There is now a 2M & 440MHz loop integrated into the model 100W 10-80M MagLoop. A most excellent choice for the 857 that also supports VHF UHF & HF. See - Loops & MagLoops (

Thank you I learned something

You should be able to program one of the screen menu buttons (Menu 065 - 067) or the mic buttons (068 - 070) as RF power set (Menu 075).? It would make it easy to quickly bring up that setting.

144 MHz: 20W 430 MHz: 10W with the brown wire. 73 Alfred - DJ0GM

I did that, but put the grounding wire on a switch Mick SA4MDN

Grounding the brown wire in the power connector would drop maximum output to 10W. Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or failure, find that they very rarely

Hi. My Dad has a FT-857d and has recently installed an external amplifier which needs a drive level of around 20W. So we are looking for a convient? (fast) way to switch the rig from full power out

Eric, I must be losing my mind.... I've got this thread being started by VK2DHV (who according to the ACMA database is David). All good - Stay safe. Cameron

Hi Cameron, Stuart is the person who originally asked the question! Simple ACMA lookup. 73….Eric VK2VE. Sent: Wednesday, 7 July 2021 15:24 To: [email protected] Subject: Re: [FT-857] Another newbie

I guess I was just commenting that you can store any frequency in memory via CHIRP. If the radio is receive-only on non-ham frequencies, it will still store it but for receive only. If you do the

Eric, Zak et al (although I'm not sure who Stuart is)... ? This legal situation is actually much more onerous than it appears on the surface - hence why my response included specific reference to the

I don't understand how the plug that came with the FT857 and two others on cables I have purchased elsewhere can all have faults. As I mentioned, all these plugs fit just fine on the FT897D and the

Thanks everyone. There is no value in me doing this if I can't transmit and receive on those frequencies. I understood that in an "emergency" situation (which in reality is the only time I would do

Hi Zack, Agreed, however, Stewart was also mentioning about transmitting using the radio hence Compton’s, and my, comments about its none type approval here in Australia. One of the requirements for