¿ªÔÆÌåÓý

If your email is ¡°Internationals LLC¡±, what is your ham license designation, location, personal name, etc? Sent: Wednesday, 22 April, 2020 11:51 To: [email protected] Subject: [FT-857] Saying Hello

Hi everyone. I am new to the group and I hope everyone is staying safe.

For sale in Holland (Europe) FT-857D with tuner FC-30 and Microkeyer cable DB37-FT-mini8. Prepared for all-band (including 60M). € 650 + shipping Direct contact pa3c@... +31 6 547 00 445 Aart

I have an FT-857 for sale. This belonged to W4MUZ, who is no longer operating. There are some lines in the display, but otherwise works. Asking $450.00 -- Tom Ponte, WB1CZX

Hi Josh and all.....sorry but sold the 857.....forgot to advise group.... Jerry n9ac

Hi Jerry Still available? ?I¡¯d be interested. Josh KC2TKK

Thank you Arman for coming back with solution, something to keep in mind (or somewhere on the computer). 73 de Thierry -- Thierry, F-14314, JN38JK, Delta Loop

Hello everyone, Just for information to all that have the problem. I have found the source of the problem. It is a faulty relay in a power amplified board. In my case the relay was the one that

This is a know problem with the 857 and RT Systems programming cable. It is mentioned on the RT Systems website in the knowledge base. See below. *Knowledge Base (

Hi Peter, This is not the case. I have removed all possible RFI from mic by using caps soldered to ground.?Also transmitting with 5w only also causing the issue.? In my case transmitter stops

Wish I knew that I could have ordered another 857 control head !? ?I? DID have to open it up and sort of cokes (sp?) the LCD into working better... That said, I have two of the 857Ds so I'm OK for

I had a similar issue and, as noted previously by other group members, it was caused by RFI in the mic holding transmit open. Here are notes from my maintenance log: * On 10M FM above 35 or 40W (and

There have been a few threads on this issue, some inconclusive and some resolved. I am creating this thread to provide all the information in one place for the problem and resolution as I experienced

Thanks for the tip Arman, if the RF problem comes back should I choose to use that MH36 mic?again I will give your fix a shot Mick SA4MDN

Hello Mick, I was having the problem with RF getting into microphone. Currently using microphone MH31 with installed BX-184 kit into it with Heil HC-5 microphone element.?So the issue with the RF

?? --John, KK4QFP--

my 817 and 100watt amp does something similar when I had the mic gain a little too high, it hangs for 20 seconds or so, turned the mic gain down and return to receive was almost instant, that was

Hello, I also own FT-857D and having the same described issue only on 20m band. All other bans are working fine, just a some delay on 20m after TX or band changing. Any thoughts what is causing the

I like the idea of an HDMI port on the radio, drooling over the FTDX101MP.?I had my FT857 and FT8800 in my 2003 Silverado with the head mounted in front of the little pooka above the front window

I like the idea of an FT-857E -just use the FT-857D form factor and currently tested technology, but program-in the current 160 meter frequencies, install a more durable LCD display, AND add a HMDI