开云体育

Just got the unit back.? Opened it up and replaced the RJ12, NADA.? Both checked out good with an ohmmeter.? Yaesu said the mother board showed signs of corrosion, NOT, even under a black light..?

yep - a RJ12

the cable for the head is a 6 conductor RG12, they look like the standard 4 conductor phone cable but it is a bit wider and has 6 conductors

Thanks, Merlin. I'm aware of the original Cat Display...and it seems very nice. The one I mentioned "appears" cryptically to have a few additional features which is why I was asking about anyone with

Wish that display had a CAT pass-thru or some way to simultaneously have CAT control with a digital mode interface box (RigBlaster, etc). But then, simultaneous use of the CAT port by two separate

Will confirm when it gets here.? Thanks. Mel, K6KBE

I think the connectors are RJ12 K3CLT Chuck Tobias

No never separated the panel.? I have lots of telco 4 conductor cables, used to be in PT&T decades ago and my son just retired from AT&T.? When I get the unit back, I will take it apart and see what

Go to wal Mart and bring the cable with you. Hold the ends together and look at the color arrangement. Get a 4 conductor phone cable off the shelf and look for the same arrangement end to end. You

Thanks,? Will look into it when the unit gets back here.? Still in transit..... Holiday traffic.... Mel, K6KBE

Base price is probably cheaper directly from Yaesu but unless you are buying other stuff the shipping will eat up any savings.

No, Chuck,? Don't have a clue as to where to get one..... Mel, K6KBE

https://www.ebay.com/itm/FT-8x7-Bluetooth-CAT-Interface-Adapter-Yaesu-FT-817-FT-857-FT-897-FT-100D-US/253970831908?_trkparms=aid%3D333200%26algo%3DCOMP.MBE%26ao%3D1%26asc%3D20171012094517%26meid%3D865

Did you try replacing the short cable between the head and radio body? K3CLT Chuck Tobias

I use the original Cat Display from New Zealand which I like very much. I believe you get more information on it than the Chinese one and it cost less too. It's made by a Ham who's name is Chris Day.

I had a problem with my 857 not starting, it turned out that the pins in the front panel connector were not all making a connection to the cable pins. Hope this helps, Dan KC7NJB -- Dan Gregs

Anyone have further info on the RadioECU 4.3 CATDisplay for the FT-857 et al? See this listing: https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F383266492489 I didn’t

Each band seems to have its own memory slot. I wondered if this is every band or a single band. Another trick is to use the cloning facility from a known good radio and see if that fixes things. All

Tks for the suggestion, Joe. No, I'm not using an amplified speaker. I use only a set of plain vanilla headphones when my XYL is home and nothing if she's out. This symptom appears to affect the RF

Thanks Paul. Menu Mode #s 87 and 88 address VOX delay and VOX gain respectively, not on or off. I've never been in the Service menu list; how do the band-selective VOX settings get accessed? Please