开云体育

Hi Unni, I think that this may have been removed because it can cause a problem after some time of usage. Possibly after a year or more, depending on how much you use it. I believe that the problem is

I have the exact same issue with mine. Been doing that for a long time. Doing a master reset does not help. I also noticed that a few other menu options will change slightly. For example, FM mic gain

Thanks, can you elaborate on why you think it might be the keying line? John K6JMQ

Dear Tobias Thank you for the reply. HRD replied that this facility from 6.3 updates are removed due to a tech. complaint from Yeasu So hope till they correct it I have to see some other way 73s GL

If you have purchased a copy of HRD you can go to support and file a trouble ticket. They will contact you and call you on the phone and help you set it up. K3CLT Chuck Tobias

Uploaded the latest HRD version 6.5 . In Rig control I cannot activate the slider control. I tried to configure bot there is no default controls added. How to add the slider default control files in

Is it in the VOX, or is it in the keying line?? Does it occur when nothing is connected? With the mike? My first thought is a leaky bypass cap. Cortland, KA5S

Hi All, The VOX on one of my 857d s comes on when I power in up, even after turning the VOX off in menu?MFd and the VOX Gain in menu 88 to 1.?? This doesn't happen until it has been off for about

Hello John - Thank you for these tips. I just went to the service menu and my carrier level reading was 138. I reduced it to 100 and now the ALC reading on transmit kicks up to two or three segments

Re: Improvements to transmit audio on AM /g/FT-857/message/40841?p=,,,20,0,0,0::Created,,FT-857D+on+a+local+AM+net+every+night,20,2,0,38991282 73 John N3AAZ

Good that you have found the problem Jerry and updated us all on the resolution! 73 Graham G4FUJ

Well.....it turns out the cable and menu settings on my FT857 were all good after all. Found out I had the wrong setting for the output from my laptop and that prevented the signal going back to the

Hello.? First note to group so here it goes!? Has anyone taken the data out jack from the 857 and connected it directly to usb for digital control via the computer on PSK, FT8 or other modes?? If

Regarding #73 and #74 in the hidden menu, i like to know what's the meaning of HTEMP-THRESHOLD (38) and FTEMP-THRESHOLD (102) just out of curiosity. I know this thresholds are responsible for the fans

I did this once...hit the lock button when aiming for the band switch.? Took me awhile to figure out why nothing worked.

Did you "lock" the radio? Regards, Tom

Sent from Mail for Windows 10 I use to be able to use the V/M (#13 in manual) to toggle between the HF bands and those repeater frequencies I programmed in. Now when pushing the button nothing

Hello, thank you for solving this issue. I have exactly the same problem and was ready to take it to a tech for fixing it. I am so glad it was just a menu adjustment. How did you figure this out? Is

I used the 857 on 10 and 6 meters.? Of course WWV listening and it worked fine, no reports of audio issues.? Just over the years the through hole issues on the PCB in the AM mode. Mel, K6KBE