开云体育

I haven't had a 857 for a few years and didn't use mine as a dual bander, but was thinking that maybe the squelch is set too light. Add a little more and see how that works. K3CLT Chuck Tobias

Thanks all.? I do wish it was not so darn loud.? Really annoying.

OK... So I will ask if any of you replaced the?Q1063 and why?

Doesn't matter, in FM mode it will always work as Squelch....

Sounds like you have it in RF gain mode. Are you sure you have menu 80 set for squelch? Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or failure, find that they very

If you can hear the repeater, you will hear a squelchtail, quite often, depends on the repeater.Your squelch control wont get rid of it. The squelchtail is as strong as the repeater signal.Bob

Hi All, Both of my 6 year old 857d s experience loud squelch tails on all of the local FM analog 2m & 70cm repeaters?even with menu #80 "SQL" on and the "SQL/RF" dial rotated full

Check the power cord for corrosion anywhere, especially inside the fuse holders.? Remove the fuses and clean each contact surface thoroughly.? Do same with coax connections.? Long term mobile

I would call Yaesu Tech Support and talk to them about it. Its a free service. I would not do any resets. Call Yaesu. K3CLT Chuck Tobias

When hooked to your antenna, how high is your swr?And, if you are on the dummy load, no, it probably wont hit the repeater.BobSent from my Verizon, Samsung Galaxy smartphone

Nothing happens. I can be talking to someone and they will start asking if I'm still on frequency. The radio acts normal but no one hears me. When hooked up to a dummy load it acts like it should work

Hello everyone, I reckon after a factory reset to release the TUN/CAT/LINEAR option that was stuck in TUN for some reason, my Squelch started acting strange in FM. In fact its acting like an signal

Nothing happens, just no tx for a minutes then it gets back to normal

I have used the 857 in my company truck for years in all kinds? of weather. Works every time. I use heavy wire from the battery to the radio with good connections. What happens when you try to

Mine doesn’t transmit for the first 5 minutes then it works fine

I've been having a odd problem with my radio on and off for the last few years. It seems to happen when it gets cooler, even thought the radio is indoors. It will receive but not transmit. Once I

Thanks.? ?Most appreciated.

I got mine to work on Linux and Macosx a while back. As the background noise around my QTH is very high S9++, mostly used for FT8 & CW. PSK activity is very much lacking around here, AFAICT. Will have

Thanks Dennis

Thanks Kelly and others for the info. ? I'll give it a try, I got one inexpensively and hope to add it to my kit as a backup to my existing Signalink.It sounds like it does the same tasks as a