开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: External Cat Display #cat

 

Yes. 817/857/ etc.

On Dec 7, 2022, at 8:59 PM, david lang <david@...> wrote:

?does this work with the 857 family? the link provided talks about the cs800

David Lang

On Wed, 7 Dec 2022, Trent N4DTF EM55 wrote:

I haven't used one . . . yet. But on the Ham Radio Workbench Podcast a week or so ago they talked about this one - I'm pretty interested in it. The 857 screen is just too small for even casual use while mobile, this would seem to solve the problem.




Re: External Cat Display #cat

 

does this work with the 857 family? the link provided talks about the cs800

David Lang

On Wed, 7 Dec 2022, Trent N4DTF EM55 wrote:

I haven't used one . . . yet. ?But on the Ham Radio Workbench Podcast a week or so ago they talked about this one - I'm pretty interested in it. ?The 857 screen is just too small for even casual use while mobile, this would seem to solve the problem.


Re: External Cat Display #cat

 

I haven't used one . . . yet. ?But on the Ham Radio Workbench Podcast a week or so ago they talked about this one - I'm pretty interested in it. ?The 857 screen is just too small for even casual use while mobile, this would seem to solve the problem. ?


Re: remote operation from two different locations

 

That would be my suggestion. Run both cables, but only plug in the one that you are going to use. Just label them clearly on the radio end.


On Tue, Dec 6, 2022 at 7:08 AM Leonard K. Pennock <leonardpennock@...> wrote:
For the control head I'm assuming you mean having 2 runs of cable, One
into the truck and one into the camper.? I would worry about the
unterminated line acting as an antenna and causing RFI issues. If
possible I would think it would be better to just connect the cable you
needed to the body when you wanted to change positions.

Leonard K. Pennock
AD7AS

Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.

On 12/6/22 12:07 AM, Tim Goodrich wrote:
> Hi All,
>
> I'm setting up my 857 in a new vehicle and got to thinking it might be
> nice to be able to operate from inside the can of the truck AND inside
> the bed/camper shell of the truck when tucked away for bed at night.
> I've set up the control head for remote operation before, but not from
> two places. Is there any reason why simple RJ11 (for mic) and RJ45
> splitters (for the control head) wouldn't work?
>
> Tim
> K6TW
>







--

Paul Braun WD9GCO
Anchor, Amateur Radio Newsline

Certified Music Junkie

"Never follow anyone. Be your own hero." -- Neil Peart

"Music washes from the soul the dust of everyday life." -- Berthold Auerbach

"The Fountain of Youth is a state of mind" -- The Ides of March, "Age Before Beauty"

"Deep inside we're all the same." -- Dennis DeYoung/Styx


Re: remote operation from two different locations

 

For the control head I'm assuming you mean having 2 runs of cable, One into the truck and one into the camper. I would worry about the unterminated line acting as an antenna and causing RFI issues. If possible I would think it would be better to just connect the cable you needed to the body when you wanted to change positions.

Leonard K. Pennock
AD7AS

Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.

On 12/6/22 12:07 AM, Tim Goodrich wrote:
Hi All,
I'm setting up my 857 in a new vehicle and got to thinking it might be nice to be able to operate from inside the can of the truck AND inside the bed/camper shell of the truck when tucked away for bed at night. I've set up the control head for remote operation before, but not from two places. Is there any reason why simple RJ11 (for mic) and RJ45 splitters (for the control head) wouldn't work?
Tim
K6TW


remote operation from two different locations

 

Hi All,

I'm setting up my 857 in a new vehicle and got to thinking it might be nice to be able to operate from inside the can of the truck AND inside the bed/camper shell of the truck when tucked away for bed at night. I've set up the control head for remote operation before, but not from two places. Is there any reason why simple RJ11 (for mic) and RJ45 splitters (for the control head) wouldn't work?

Tim
K6TW


Re: The FT857 dead on transmit saga

 

开云体育

Looks like Yaesu is no longer “repairing” radios but just replacing circuit boards.? These days I have had much better luck (and less-expensive repairs) ant independent repair shops like hamrepair.com and others.? Glad you got yours fixed!

73,

Ronald Jakubowski

K2RJ

?


Re: The FT857 dead on transmit saga

 

开云体育

Well done Zack,
It’s great to hear you had a go and were able to repair your FT857D, a good feeling I’m sure.
That’s what’s we amateur’s are all about not just chatting over the back fence!!!
Wayne VK2DWP

Wayne's iPad


From: [email protected] <[email protected]> on behalf of Zack Widup (w9sz.zack@...) <w9sz.zack@...>
Sent: Sunday, December 4, 2022 12:29:20 PM
To: [email protected] <[email protected]>
Subject: Re: [FT-857] The FT857 dead on transmit saga
?
Well, it appears I got really lucky. I got the new 2SK2973's in and just put them into the rig. I now have transmit power out on all bands. It appears I don't even need to recalibrate anything. The output power at several settings matches the records I made when I got the rig.

$10 worth of parts and it's back on the air. That sure beats the $650 that Yaesu wanted to replace the main board.

73, Zack W9SZ

On Sat, Nov 19, 2022 at 5:30 PM Zack Widup via <w9sz.zack=[email protected]> wrote:
Back in July I posted that my FT857 emitted a little smoke and stopped transmitting on all bands. I sent it off to Yaesu and they gave me an estimate of about $650 to replace the main board in the unit. I declined and they sent me the radio back.

I finally got to looking at it today. I had looked at it back in July, but concentrated on the PA board. This time I looked over the main board. I noticed that Q1006, a transmit pre-driver FET, had a little hole blown in the top of it. The opposing FET in the pair, Q1007, looks intact. These FET's are about $5 apiece and I can easily replace both of these 2SK2973 FET's in an SOT-89 package. I don't know if the drivers that follow it, the 2SK2975's are good or not. Those would be more difficult to replace, as they have to be soldered underneath the chip. Maybe I'll start with the 2SK2973's and see if it fixes the problem. If it does, it's a lot cheaper than $650!

73, Zack W9SZ


Re: The FT857 dead on transmit saga

 

Well, it appears I got really lucky. I got the new 2SK2973's in and just put them into the rig. I now have transmit power out on all bands. It appears I don't even need to recalibrate anything. The output power at several settings matches the records I made when I got the rig.

$10 worth of parts and it's back on the air. That sure beats the $650 that Yaesu wanted to replace the main board.

73, Zack W9SZ


On Sat, Nov 19, 2022 at 5:30 PM Zack Widup via <w9sz.zack=[email protected]> wrote:
Back in July I posted that my FT857 emitted a little smoke and stopped transmitting on all bands. I sent it off to Yaesu and they gave me an estimate of about $650 to replace the main board in the unit. I declined and they sent me the radio back.

I finally got to looking at it today. I had looked at it back in July, but concentrated on the PA board. This time I looked over the main board. I noticed that Q1006, a transmit pre-driver FET, had a little hole blown in the top of it. The opposing FET in the pair, Q1007, looks intact. These FET's are about $5 apiece and I can easily replace both of these 2SK2973 FET's in an SOT-89 package. I don't know if the drivers that follow it, the 2SK2975's are good or not. Those would be more difficult to replace, as they have to be soldered underneath the chip. Maybe I'll start with the 2SK2973's and see if it fixes the problem. If it does, it's a lot cheaper than $650!

73, Zack W9SZ


Re: 60m missing after reset

 

开云体育

If the wide band mod has been done you have to now manually save them in memory.?
Tom k3tvc

On Dec 1, 2022, at 2:38 PM, Kent Trimble, K9ZTV <k9ztv@...> wrote:

?
Jack ...

I assume it did earlier? ?If not, it may not be a USA-version which was the only version that allowed 60 meter operation.

60 meters is fixed. ?You cannot lose it. ?See page 40 of the manual. ?You access it differently than you do the other bands.

73,
Kent
K9ZTV

On Dec 1, 2022, at 11:31 AM, Jack W4GRJ <w4grj@...> wrote:

?in my ft857D cannot access 60m memory channels after factory reset.
any suggestions?
tnx?


Re: 60m missing after reset

 

开云体育

Jack ...

I assume it did earlier? ?If not, it may not be a USA-version which was the only version that allowed 60 meter operation.

60 meters is fixed. ?You cannot lose it. ?See page 40 of the manual. ?You access it differently than you do the other bands.

73,
Kent
K9ZTV

On Dec 1, 2022, at 11:31 AM, Jack W4GRJ <w4grj@...> wrote:

?in my ft857D cannot access 60m memory channels after factory reset.
any suggestions?
tnx?


60m missing after reset

 

in my ft857D cannot access 60m memory channels after factory reset.
any suggestions?
tnx?


Re: CatRadio - Radio Control Software #cat #software

 

Why is it that "download software" is buried somewhere ?

At the bottom of the page,?????


Actually more basic tech info is missing or not specifically highlighted .

That would be really nice to know
operating system (Windoze ?)
cat interface - serial? cable or what ?

The original briefly mentions "dependencies " .



Re: CatRadio - Radio Control Software #cat #software

Don Goodhart
 

开云体育

Does the catradio work on a MAC?

Get


From: [email protected] <[email protected]> on behalf of Johnny IZ8EWD via groups.io <js.slave@...>
Sent: Monday, November 28, 2022 5:44:58 AM
To: [email protected] <[email protected]>
Subject: Re: [FT-857] CatRadio - Radio Control Software #cat #software
?
CatRadio?1.3.0?is now available for download?

Main changes:
  • Radio info
  • Dark themes
  • MIC levels
  • NB2
  • Meter COMP, ID, VDD
  • Yaesu band stack
  • Hamlib 4.5
  • Bug fixes and various GUI and code improvements

--
Thank You
Don Goodhart
N6eur0u8@...


Re: CatRadio - Radio Control Software #cat #software

 

CatRadio?1.3.0?is now available for download?

Main changes:
  • Radio info
  • Dark themes
  • MIC levels
  • NB2
  • Meter COMP, ID, VDD
  • Yaesu band stack
  • Hamlib 4.5
  • Bug fixes and various GUI and code improvements


Re: The FT857 dead on transmit saga

 

Please let us know the outcome of your efforts. Ted, KE4NBB?


The FT857 dead on transmit saga

 

Back in July I posted that my FT857 emitted a little smoke and stopped transmitting on all bands. I sent it off to Yaesu and they gave me an estimate of about $650 to replace the main board in the unit. I declined and they sent me the radio back.

I finally got to looking at it today. I had looked at it back in July, but concentrated on the PA board. This time I looked over the main board. I noticed that Q1006, a transmit pre-driver FET, had a little hole blown in the top of it. The opposing FET in the pair, Q1007, looks intact. These FET's are about $5 apiece and I can easily replace both of these 2SK2973 FET's in an SOT-89 package. I don't know if the drivers that follow it, the 2SK2975's are good or not. Those would be more difficult to replace, as they have to be soldered underneath the chip. Maybe I'll start with the 2SK2973's and see if it fixes the problem. If it does, it's a lot cheaper than $650!

73, Zack W9SZ


Re: MH-59 microphone

 

开云体育

Thanks for the offer. I have the operating manual already and found the MH 59 in the back of the manual.? Appreciate the comeback.


?

On 11/19/2022 7:06 AM, Hank Lambert (KB4MTO) wrote:

I have the manual and the technical supplement on my website:

?

73,

?

--Hank

KB4MTO / TA5ZC

?

?

?

From: [email protected] <[email protected]> on behalf of L B Little <mech259@...>
Date: Monday, November 14, 2022 at 7:03 PM
To: [email protected] <[email protected]>
Subject: [FT-857] MH-59 microphone

Anyone have documentation of use of the MH59 microphone? What all of the extra buttons do as I can't see them very well on my mic.

-- 
WB5YDA
L.B. Little
President
Beaumont Amateur Radio Club


Re: MH-59 microphone

 

开云体育

I have the manual and the technical supplement on my website:

?

73,

?

--Hank

KB4MTO / TA5ZC

?

?

?

From: [email protected] <[email protected]> on behalf of L B Little <mech259@...>
Date: Monday, November 14, 2022 at 7:03 PM
To: [email protected] <[email protected]>
Subject: [FT-857] MH-59 microphone

Anyone have documentation of use of the MH59 microphone? What all of the extra buttons do as I can't see them very well on my mic.


Re: Manual

 

开云体育

Wrong group.


K9ZTV

On Nov 18, 2022, at 1:38 PM, ON4TVT <tony.vantittelboom@...> wrote:

?

I would like to know how to print out the morserino manual on paper ??

I just built a morserino. How can I find out which version of the manual ?I need to use ?