开云体育

I started with an MFJ-904H. It did the job and worked well portable as it was quite light. I found having a decent meter for swr and power to be very helpful. However I recently scooped an LDG

I pondered that issue as well. However, my chronic hand shaking makes all these projects so much harder. The LDG YT-100 was a much simpler solution.

ANTENNA TUNER CHOICES There's a basic choice about antenna tuners. If you go to a "manual" tuner (I have an MFJ-945E), it's a bit more work. But you have a better idea of the "quality" of the tune,

"John Maguire AA6ZT" <AA6ZT.JM@...> wrote: so simple to make a remote for the z100 4 pin mic plug and socket thin 4 core wire tiny box 2 leds 1 push button sw job done in moments mine works a

I am using for several years the 200 version. In the manual I can read "If you are using the optional ICOM or Yaesu interface cable, your radio will automatically reduce power, switch to CW mode, and

I second Scott's suggestion. When I first got my 857, I also bought the LDG Z-100. This set-up was for my vehicle with the 857 body & Z-100 back near the battery. The 857 front panel controller is

I’ve ran tuners and different antennas over the years. I have switched over to antennas some years ago. The “tuned” antenna performs better than a tuner with an 8 foot whip, especially on 80

Kenny, The Yaesu FC-40 is the best thing since bottled anything as a FT-857D or other Yaesu rig companion.? Simply works like a charm when placed very near the antenna proper.? These are really more

I used LDG Z11Pro and AT100 with my 857s. Both have worked well. Z11pro uses less power but doesn't have the nice bar graphs for Power and SWR. Other than that, not enough difference to be concerned

I also had an LDG tuner too, worked well with a g5rv. Matt

Whàt is useless about what I posted. U need to be specific. Kofi

My 857’s auto tuner is the excellent LDG YT-100 with LDG cable. It’s designed for your rig and has same footprint. The tuner and the rig (for safe storage) both fit into one SAW metal ammo

I'm using LDG Z 100 Plus with my 857D. Portable, smaller than 857D and battery pack can also be included inside the unit for maximum portability. Mohan VU3MMU [email protected]> wrote:

I use the yt-100, it takes its power from the radio,, cat port,, no need?for extra power supply, use it mobile with the remote option.

Hello All i am using the? LDG Z-11PRO with my FT-857 and it works perfectly. there is a cable connection specially made for the Yaesu that comes with the tuner. the nice thing is that the dimension

"kennytv via groups.io" <kennytv@...> wrote: LDG Z100 is what i use with my half size g5 it works very well it has to be said better than any of the MFJ ones i have tried Pete

I use as an ATU, the LDG YT100. The aerials and antennas are varied. It works for me. I just bought a Buddy Pole so will see if that is OK too.

The LDG AT100 PROII is also a good choice because it will work with any radio. Tom k3tvc Sent from my iFone

Be careful this model is not rated for full power digital.?

I have used the mfj 929 as well as the mfj-939 if you want two antenna ports and a meter the 929 is a little higher but a great tuner the Y at the end of 929 or 939 is for Yaesu these are both