Re: HAM RADIO DELUX AND FT857D
Dear Eric That was the same reason told by HRD people. Any way will wait and see
73s and GD GL Unni VU2TE
On Wed, Dec 11, 2019 at 9:21 AM Eric < eric@...> wrote: Hi Unni, ? I think that this may have been removed because it can cause a problem after some time of usage. Possibly after a year or more, depending on how much you use it. ? I believe that the problem is that it continuously writes to some register/memory and eventually it wears out the memory effectively killing the radio. ? Personally, I would much prefer to retain my radio in good condition rather than killing it prematurely. ? 73¡.Eric VK2VE ? From: [email protected] <[email protected]> On Behalf Of Easwaran Unni Tharakkal VU2TE - unnitharakkal at
Sent: Tuesday, 10 December 2019 23:09
To: [email protected]
Subject: Re: [FT-857] HAM RADIO DELUX AND FT857D ? Dear? Tobias HRD replied that this facility from 6.3 updates are removed due to a tech. complaint from Yeasu So hope till they correct it I have to see some other way ? On Tue, Dec 10, 2019 at 4:34 PM cltoby600 via Groups.Io <cltoby600=[email protected]> wrote: If you have purchased a copy of HRD you can go to support and file a trouble ticket. They will contact you and call you on the phone and help you set it up. On Tuesday, December 10, 2019, 05:49:23 AM EST, Easwaran Unni Tharakkal VU2TE <unnitharakkal@...> wrote: Uploaded the latest HRD version 6.5 . In Rig control I cannot activate the slider control. I tried to configure bot there is no default controls added. How to add the slider default control files in FT857
73 s?
Unni
VU2TE
|
Re: VOX Comes On When Powering Up
Update:? I live close to the Yaesu facility in Cerritos CA.? I met with Yaesu techs Tim and Peter and went over this with them.? They are as baffled as we are and have taken on the task of resolving this.? James, I recommend you call Yaesu Cerritos and speak with Tim about this while they are fresh on this.
|
Re: HAM RADIO DELUX AND FT857D
Hi Unni, ? I think that this may have been removed because it can cause a problem after some time of usage. Possibly after a year or more, depending on how much you use it. ? I believe that the problem is that it continuously writes to some register/memory and eventually it wears out the memory effectively killing the radio. ? Personally, I would much prefer to retain my radio in good condition rather than killing it prematurely. ? 73¡.Eric VK2VE ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Easwaran Unni Tharakkal VU2TE - unnitharakkal at gmail.com
Sent: Tuesday, 10 December 2019 23:09
To: [email protected]
Subject: Re: [FT-857] HAM RADIO DELUX AND FT857D ? Dear? Tobias HRD replied that this facility from 6.3 updates are removed due to a tech. complaint from Yeasu So hope till they correct it I have to see some other way ? On Tue, Dec 10, 2019 at 4:34 PM cltoby600 via Groups.Io <cltoby600=[email protected]> wrote: If you have purchased a copy of HRD you can go to support and file a trouble ticket. They will contact you and call you on the phone and help you set it up. On Tuesday, December 10, 2019, 05:49:23 AM EST, Easwaran Unni Tharakkal VU2TE <unnitharakkal@...> wrote: Uploaded the latest HRD version 6.5 . In Rig control I cannot activate the slider control. I tried to configure bot there is no default controls added. How to add the slider default control files in FT857
73 s?
Unni
VU2TE
|
Re: VOX Comes On When Powering Up
I have the exact same issue with mine. Been doing that for a long time. Doing a master reset does not help. I also noticed that a few other menu options will change slightly. For example, FM mic gain will change from 50 to 51. Lock mode will change from dial to all. Other than that, radio works fine. Yaesu support cannot help other than to send it in for repair.
On Tue, Dec 10, 2019, 12:37 AM John Quinzio via Groups.Io <jquinzio= [email protected]> wrote: Hi All,
The VOX on one of my 857d s comes on when I power in up, even after turning the VOX off in menu?MFd and the VOX Gain in menu 88 to 1.?? This doesn't happen until it has been off for about 45 minutes.? If I turn it off then power-up immediately?this doesn't happen.? Any Ideas?
Thanks, John K6JMQ
|
Re: VOX Comes On When Powering Up
Thanks, can you elaborate on why you think it might be the keying line?
John K6JMQ
|
Re: HAM RADIO DELUX AND FT857D
Dear?
Tobias
Thank you for the reply. HRD replied that this facility from 6.3 updates are removed due to a tech. complaint from Yeasu So hope till they correct it I have to see some other way
73s GL Unni VU2TE
On Tue, Dec 10, 2019 at 4:34 PM cltoby600 via Groups.Io <cltoby600= [email protected]> wrote: If you have purchased a copy of HRD you can go to support and file a trouble ticket. They will contact you and call you on the phone and help you set it up.
K3CLT
Chuck Tobias
On Tuesday, December 10, 2019, 05:49:23 AM EST, Easwaran Unni Tharakkal VU2TE < unnitharakkal@...> wrote:
Uploaded the latest HRD version 6.5 . In Rig control I cannot activate the slider control. I tried to configure bot there is no default controls added. How to add the slider default control files in FT857
73 s?
Unni
VU2TE
|
Re: HAM RADIO DELUX AND FT857D
If you have purchased a copy of HRD you can go to support and file a trouble ticket. They will contact you and call you on the phone and help you set it up.
K3CLT
Chuck Tobias
On Tuesday, December 10, 2019, 05:49:23 AM EST, Easwaran Unni Tharakkal VU2TE <unnitharakkal@...> wrote:
Uploaded the latest HRD version 6.5 . In Rig control I cannot activate the slider control. I tried to configure bot there is no default controls added. How to add the slider default control files in FT857
73 s?
Unni
VU2TE
|
HAM RADIO DELUX AND FT857D
Uploaded the latest HRD version 6.5 . In Rig control I cannot activate the slider control. I tried to configure bot there is no default controls added. How to add the slider default control files in FT857
73 s?
Unni
VU2TE
|
Re: VOX Comes On When Powering Up
Is it in the VOX, or is it in the keying line?? Does it occur when nothing is connected? With the mike? My first thought is a leaky bypass cap.
Cortland, KA5S
|
VOX Comes On When Powering Up
Hi All,
The VOX on one of my 857d s comes on when I power in up, even after turning the VOX off in menu?MFd and the VOX Gain in menu 88 to 1.?? This doesn't happen until it has been off for about 45 minutes.? If I turn it off then power-up immediately?this doesn't happen.? Any Ideas?
Thanks, John K6JMQ
|
Hello John - ?Thank you for these tips. I just went to the service menu and my carrier level?reading was 138. I reduced it to 100 and now the ALC reading on transmit kicks up to two or three segments instead of "pinning" out, like before, regardless of the mike gain setting for AM. I have a friend who will get on tomorrow and I will ask him to listen?to me on AM an see if there is an improvement.??
73, Bruce? K6RQR
Re: Improvements to transmit audio on AM
?/g/FT-857/message/40841?p=,,,20,0,0,0::Created,,FT-857D+on+a+local+AM+net+every+night,20,2,0,38991282
73
John
N3AAZ
|
Re: Improvements to transmit audio on AM
?/g/FT-857/message/40841?p=,,,20,0,0,0::Created,,FT-857D+on+a+local+AM+net+every+night,20,2,0,38991282
73
John
N3AAZ
|
Re: FT857 data out jack directly to usb
Good that you have found the problem Jerry and updated us all on the resolution!
73
Graham G4FUJ
|
Re: FT857 data out jack directly to usb
Well.....it turns out the cable and menu settings on my FT857 were all good after all. Found out I had the wrong setting for the output from my laptop and that prevented the signal going back to the 857. Back to digital modes I go.
Jerry n9ac
|
I did have menu item 80 set for SQL.? Thanks for the comment
?
?
-----Original Message-----
From: Leonard K. Pennock <leonardpennock@...>
To: FT-857 < [email protected]>
Sent: Sat, Nov 23, 2019 6:55 am
Subject: Re: [FT-857] Loud Squelch Tail
Sounds like you have it in RF gain mode.? Are you sure you have menu 80
set for squelch?
Leonard K. Pennock
AD7AS
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
On 11/22/19 10:56 PM, John Quinzio via Groups.Io wrote:
> Hi All,
>
> Both of my 6 year old 857d s experience loud squelch tails on all of the
> local FM analog 2m & 70cm repeaters?even with menu #80 "SQL" on and the
> "SQL/RF" dial rotated full clockwise.??Signal out is good and the
> receive is good.? Any ideas on how to address?this?
>
> Thanks, John K6JMQ
>
|
FT857 data out jack directly to usb
Hello.? First note to group so here it goes!? Has anyone taken the data out jack from the 857 and connected it directly to usb for digital control via the computer on PSK, FT8 or other modes?? If so, what are your menu settings for the rig.? I can get mine to receive the info from the rig via this connection but can't get the computer to send an outgoing message on any digital mode.? I use at the computer two phono jacks which plug into a Sabrent phono to usb connector.? This cable goes back to the 857 data in connection.? Any help out there?? Thanks.? jerry n9ac
|
HTEMP-THRESHOLD - What does it mean?
Regarding #73 and #74 in the hidden menu, i like to know what's the meaning of HTEMP-THRESHOLD (38) and FTEMP-THRESHOLD (102) just out of curiosity.?
I know this thresholds are responsible for the fans to kick in.
But what does each threshold do of their own?
?
73 de Sigi / DH1KLM
|
I did this once...hit the lock button when aiming for the band switch.? Took me awhile to figure out why nothing worked.
|
Did you "lock" the radio?
Regards,
Tom
? ? Sent from for Windows 10 I use to be able to use the V/M (#13 in manual) to toggle between the HF bands and those repeater frequencies I programmed in. Now when pushing the button nothing happens. Any help? Thanks, W3EK
____________________________________________________________
--
+++++++++++++++
Tony
VA7TF? VE7ACF
|
? ? Sent from for Windows 10 I use to be able to use the V/M (#13 in manual) to toggle between the HF bands and those repeater frequencies I programmed in. Now when pushing the button nothing happens. Any help? Thanks, W3EK
|
Graham Wright
DH1KLM
Tony VA7TF, VE7ACF