¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: Cables for FT-857 with Armoloq
You have it correct. I used right-angle BNC adapters plus 12 inch jumpers. I ran RG316 for HF and RG58 for the UHF/VHF connection but it may not matter given the short length. There is enough slack to
By CW <rogue_untidy007@...> · #53733 ·
Re: Cables for FT-857 with Armoloq
This is the frame and the BNC connection(s) are up on the front. Though looking at their picture, I actually reversed the small angle piece and have it facing forward a bit more. Not sure why I didn't
By David Smith · #53732 ·
Re: Cables for FT-857 with Armoloq
No, I need about a 1 foot long jumper to bring the antenna connections from the back of the radio up to the face plate area. I am going to order two jumpers and think a 1 foot long would work but am
By David Smith · #53731 ·
Re: Cables for FT-857 with Armoloq
Would this work for your setup?? Best Regards Hanford R. Wright WA4LZC CCA # AC11-12590
By Hanford Wright · #53730 ·
Cables for FT-857 with Armoloq
Greetings, I picked up another FT-857 and will plan to use that for my portable rig. I also grabbed some Armoloq rails and the BNC connectors. I measured with a small string and it seems awfully close
By David Smith · #53729 ·
For sale: FT-857D
Nice clean well looked after radio from non smoking shack. Has only a little use and is sitting idle, needs a new home. Comes with hand mic and power cord. First 600 euro takes it. Shipping price has
By marksmbx · #53728 ·
Re: Ft 857D with Ham Radio Deluxe
Is there an archive to get the last free version of hamradiodeluxe, the version which does not damage the FT857D EEPROM?? I use a version from 2008 and am concerned it will cause a problem as this
By Andy N3LCW · #53727 ·
Re: CW on FM
All, thanks for the response.73 George KB3WAQ?
By KB3WAQ · #53726 ·
Re: CW on FM
Yes, all modes on all bands.? 2M and 70Cms have a differing PA, and the power reduction on the extra little power lead cable works as well.
By G4IJL · #53725 ·
Re: CW on FM
"They are truly *all band* ALL mode." Well nearly all band - they don't cover the UK 4m (70MHz) band, nor I believe the USA 220MHz band. 73 Graham G4FUJ
By Graham Wright · #53724 ·
Re: CW on FM
One may use an MFJ ¡°Jim Handy¡± accessory to send what sounds like CW on 2 mtrs FM. I¡¯ve done it for years to teach CW on FM analog repeaters. Scott, KD4MSR
By kd4msr · #53723 ·
Re: CW on FM
Yes you can but it won't be on FM.?Thanks and 73,Jim, N8JE?Sent from my Galaxy
By Jim Ebner · #53722 ·
Re: CW on FM
Yes, you can. That is one reason why the FT-8XX radios are amazing. They are truly all band ALL mode. On Sat, Nov 25, 2023 at 9:16, Leonard K. Pennock<leonardpennock@...> wrote: The radio
By vironpayne · #53721 ·
Re: CW on FM
The radio supports it. Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or failure, find that they very rarely lose or fail.
By Leonard K. Pennock · #53720 ·
CW on FM
I was wondering if I could send CW on 2M using my straight key? I have an 857D
By KB3WAQ · #53719 ·
Re: Old HRD version (prior to 6.3.0.410) may damage. 857
TCXO module is correct. Attached picture, you would find why I am hanging on to Old HRD for 857: On Tuesday, November 21, 2023 at 04:57:42 AM EST, Dan <yo3ggx@...> wrote: Hello
By Yo-Yoon Cho · #53717 ·
Re: Old HRD version (prior to 6.3.0.410) may damage. 857
Hello Adrian, Not yet, but you can easily edit the config to adjust the commands that are different. Is just a plain text file, well documented in the? application user manual. As the app is still
By Dan · #53716 ·
Re: Old HRD version (prior to 6.3.0.410) may damage. 857
Hello, Please use the dedicated applications forum for any questions related to jAReC or Pocket RxTx applications. https://forum.yo3ggx.ro jAReC5 is available too for download, with a lot of new
By Dan · #53713 ·
Re: Old HRD version (prior to 6.3.0.410) may damage. 857
+ From an engineering perspective, the sentence "Since the lifetime of the EEPROM in the typical '817 is likely to be closer to 10 million writes, the actual figure is likely to be more like 4 months
By Dave AA6YQ · #53711 ·
Re: Old HRD version (prior to 6.3.0.410) may damage. 857
+ AA6YQ comments below + If that was the case, why was Yaesu reporting EEPROM failures? de AA6YQ
By Dave AA6YQ · #53708 ·