开云体育

I used LDG At-200 then now with AT-1000 both worked well with my FT857D Unni VU2TE

I’m using an LDG AT-100 ProII. Works well. Needs LDG power cable that comes with tuner and LDG cable for FT-857.

I have used a MFJ 939 with my 857 for years. Get the correct adapter cable and everything will work automatically. W7JPK sends

LDG YT-100 works great for me with my 857D.

Just picked up a used FT-857D.? Any recommendations for an antenna tuner?? Currently using a G5RV antenna but will be using either a Buddipole or Super Antenna for field work.? Thank You!

"ruiz052000 via groups.io" <ruiz052000@...> wrote: You missed spam posts across multiple Ham Radio email lists. That is fortunate for you. You have posted to groups.io. I understand

Hello! Ericssons custom support does not understand the word "support". But I took a hammer and tried to remove the case with it. It worked! Inside I found a burned selenium rectifier, I replaced it

I'll admit. I didn't see what you saw but useless for Who? By the way, this site is ending soon. No one will have any access to it in the near future. K4AXX

One more time, useless paper ! Would it be possible to ban baninii.com ? Michel

While I am not sure of the bylaws of this group, being a new user to the 857d, I find the posts helpful. Perhaps you could just elect not to read his posts. *Paul*

Why are you providing links to unsolicited, obviously commercial and/or copyrighted sites and content? They are of little use and do not in any way promote the intent of Groups IO.

Some RF problems occur when RF isn’t going where it’s supposed to go. These problems generally are caused by a bad or missing cable, connector, or switching device (a switch or relay) that needs

Here is a detailed look at your favorite radio https://baninii.com/2020/10/11/ft-857-hf-mobiling-n6pet-my-ham-radio-journal/ Kofi

The Yaesu FT-857D uses relays for a variety of functions. Sometimes the relays will get buildup between their contacts and the radio can start acting odd, or certain functions stop working. Here is a

It was time to say good bye to my 2002 Tacoma SR5. It had a very functional and efficient set up for my 857 and ATAS 120. I am looking for the best way to install the rig on a new Ranger and would be

I have hooked the ground to the same point the battery connects to the chassis and the problem is resolved now. Kofi

Hi Doug, Alternatively, there are a number of apps for smart phones which will generate the DTMF tones and you can just hold the phone up to the microphone and do it that way. There also used to be

No. You will need either of the following. MH-36 E8J DTMF Microphone MH-59 A8J Remote Control Microphone Most people like the Remote Control mic due to the extra functionality it provides. Leonard

To access an IRLP location via a repeater we have to enter a 4 digit numerical code. The 857 doesn’t have a numerical pad on the microphone. Is there a way to do it thru the radio.

Rather than hook the ground to the battery, hook it to the same point the battery connects to the chassis and the issue cannot occur. Leonard K. Pennock AD7AS Those who walk bravely through life,