开云体育

After initially setting and successfuly testing 440 MHz repeater access I subsequently loose the "offset" setting. The little and hard to see -+ sign above "O" of "VFO" just goes away. Mostly and at

Doug, What is your callsign and location. I'm certain someone could help with the appropriate equipment. Andy GD1MIP

No I have not found the problem.? I dont have a watt meter so I cant try the watt meter and dummy load idea that everyone seems to say.? I am trying to reach out to my local club to see if anyone

I alwsys start at the beginning. First, take the tuner out of line. Hook the radio to awatt meter and dummy load.Put it in the AM mode. With your power set to maybe ten watts. Key it. You should see

Doug, have you resolved your LDG tuner issue? My LDG AT-200Pro (connected to my 857D) has a similar malady. It has not been used for a while and I thought the relays might suffer from not being used

Try taking the tuner out of line and put a power meter on it or dummy load with a power meter in it. and see what it says. Mick SA4MDN

I have my 857D hooked up into a YT-100 LDG tuner.? Now, when ever I try to tune on freq, I dont hear the relays clicking anymore and the the LED on the LDG flashes 4 times.? According to the manual

OK you can find my email on QRZD under my call. Troy ke4ska

I am game . See my post in this group. Prefer private e-mail? exchange. Vaclav AA7EJ

I have two 857D LCD assembly's I have replaced I would like to find someone that would/could try repairing them as I have read that with the right equipment (which I don't have) the ribbon cables to

AFTER you have replaced zebra striped LCD for your FT857 *what are you planning to do with the OLD? one* ? Can you send it to me before you toss it into the? landfill ? I''l pay shipping and

I ordered from Radio World. Excellent customer service and received quickly to Virginia (by way of CA for customs inspection). Yes, desoldering the 4-pin connection was troublesome - I am not very

I hadn't used my 857 for a few years and noticed constant static after powering it up. Sure enough, the 3 ceramic filters had the white crusties. I sent the radio to Yaesu in Cypress, California and

Does anyone have a script for Ft 857d that will run with DXLabs Commander needs to change menu mode 80 to SQL when in FM mode and back to RF Gain when in any other mode. Larry NZ5X

Try plugging the little separation cable in, (the supplied 4 inch one) just to check the longer cable hasn't got damaged.

I had this problem and contacted Yaesu. It's caused by low in rush current. I had to heavy up the power cable from the battery to the radio. My old cable some how lost its ability to handle the

You can’t really “scan” the WWV time signals since the scan would stop on the first one that breaks squelch and stay there, usually 10MHz. You could configure Scan Resume (menu 077 and 078) to

Set them up in memory channels then scan those memory channels. vaclav_sal via groups.io wrote on 6/18/2020 08:05: -- Jeff K. Steinkamp (N7YG) Tucson, AZ Scud Missile Coordinates N32.2319

Before you continue to read this _ *I did not spent much time RTFM* , so if it is there , please -? just say so and post a reference to page(s). What I know I can scan SPECIFIC band for presence of

The following may answer your questions and provide a solution. I had looked into this but never actually