开云体育

A local RTTY club is starting a weekly net doing RTTY using FM on VHF simplex. I have had no problems doing any digital stiff using the 857D and my SignaLink on USB but I am having problems getting

Unni, Press the button at the 2:00 (o clock) position of the main tuning dial and that toggles it from vfo to memory. Then turn the select know (lower left) until the channel with the correct

The Bluetooth CAT adapter does not pass audio through to radio/PC. You also will need a sound card interface for that (Singalink, Easy Digi etc.). The guy who makes the Easy Digi made one to suit my

Wow some really good info ! now just the time to get it going ! Sent from Mail for Windows 10

I've been playing with a BlueCAT adapter (only a cheap one from fleabay item # 282412926508) and it works well on my PC with HRD (last free version), I've yet to try it on a tablet and I don't know if

DIY http://www.radioamatoripeligni.it/i6ibe/android/interface.pdf http://www.radioamatoripeligni.it/i6ibe/android/interface.pdf

Dear Pennock But how to find the 6xx memories and how the MARS/CAP modification is to be done With regards and 73s Unni [FT-857] <FT-857@...> wrote:

Correction! The frequency is 5351.5 to 5360.5 Khz VU2TE FT-857@...> wrote:

Does your radio have the 6xx memories. Using those memories is the only way an unmodified 857D can transmit on 60M. If you don't have the memories you will have to do the MARS/CAP modification.

Dear all Recently the frequencies on 60 mts is opened to us (VU land). While trying to TX on our allotted frequency ie 53151.5 to 5360.5 Khz. the rig shows TX ERROR. How can we reset that portion of

Any other modes you've used with it? Jeremy Johnson KD4KZZ Sent from my Verizon 4G LTE Droid

http://www.wolphi.com/interface/ I have had good luck with the wolphilink Trinity KF5YFD

I don't believe there is an app for FT8 on Android, is there? Theo VK5IR FT-857@...> wrote:

Anyone using FT8 on a Android tablet with the ft-857d ? Need cable and program if this is possible. 73 Russ

@OP I say give it a try, but why fit it inside? Make a mic adapter and have it external then it can be removed easily without affecting the radio's value. Of course there will be moans from some (OK

What's still functioning is back up, but the site is far out of date. I've taken the site out of my signature until I have time to bring it up to date, or just dump it completely. Randy (KE5EOT) ARRL,

Ke5 your website is down

The original reference to opening amateur repeaters referred (in the UK and much of Europe at least) to the 1750Hz tone sent as a burst and only at the beginning of the transmission and before speech

The tones used in the US, and probably universally, to open the squelch on repeaters are sub-audible PL tones. Those are never heard over the air since they're sent for the duration of the

NASA actually uses QUINDAR tones for in-band signalling. And they are only transmitted by ground control. The first tone (2525 Hz) turns on the remote transmitters. The second tone (2475 Hz) turns off